Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TSF (Tapered Single with Flange) > Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial > Part Number 07098 - 07204-B  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number 07098 - 07204-B, Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial


Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.



Unit of Measure: Imperial Metric Both

Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
7000

Cone Part Number
07098

Cup Part Number
07204-B

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
0.9835 in
24.981 mm

D - Cup Outer Diameter
2.047 in
51.994 mm

D1 - Flange Outer Diameter
2.1990 in
55.855 mm

B - Cone Width
0.5614 in
14.260 mm

C - Cup Width
0.5000 in
12.700 mm

C1 - Cup Flange Width
0.1090 in
2.769 mm

T1 - Bearing Width to Flange
0.2000 in
5.080 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.06 in
1.5 mm

r - Cup Backface "To Clear" Radius2
0.06 in
1.5 mm

da - Cone Frontface Backing Diameter
1.14 in
29 mm

db - Cone Backface Backing Diameter
1.22 in
31 mm

Da - Cup Frontface Backing Diameter
2.01 in
50.04 mm

Ab - Cage-Cone Frontface Clearance
0.08 in
2 mm

Aa - Cage-Cone Backface Clearance
0 in
0 mm

a - Effective Center Location3
-0.11 in
-2.8 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
1700 lbf
7550 N

C1 - Dynamic Radial Rating (1 million revolutions)2
6540 lbf
29100 N

C0 - Static Radial Rating
6650 lbf
29600 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
1170 lbf
5190 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.45

e - ISO Factor2
0.4

Y - ISO Factor3
1.49

G1 - Heat Generation Factor (Roller-Raceway)
7.6

G2 - Heat Generation Factor (Rib-Roller End)
7.1

Cg - Geometry Factor4
0.0509
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.


 MORE IMAGES 

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-S

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-T



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers


Add To Cart Request Quote
<