All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TSF (Tapered Single with Flange) > Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial > Part Number 37431 - 37625-B  

Part Number 37431 - 37625-B, Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
37000

Cone Part Number
37431

Cup Part Number
37625-B

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
4.3125 in
109.538 mm

D - Cup Outer Diameter
6.25 in
158.750 mm

D1 - Flange Outer Diameter
6.4336 in
163.413 mm

B - Cone Width
0.8440 in
21.438 mm

C - Cup Width
0.6250 in
15.875 mm

C1 - Cup Flange Width
0.1875 in
4.763 mm

T1 - Bearing Width to Flange
0.4688 in
11.908 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.600 mm

r - Cup Backface "To Clear" Radius2
0.130 in
3.30 mm

da - Cone Frontface Backing Diameter
4.57 in
116 mm

db - Cone Backface Backing Diameter
4.84 in
123 mm

Da - Cup Frontface Backing Diameter
6.03 in
152.91 mm

Ab - Cage-Cone Frontface Clearance
0.15 in
3.8 mm

Aa - Cage-Cone Backface Clearance
0.08 in
2 mm

a - Effective Center Location3
0.54 in
13.7 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
6710 lbf
29900 N

C1 - Dynamic Radial Rating (1 million revolutions)2
25900 lbf
115000 N

C0 - Static Radial Rating
40100 lbf
179000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
6960 lbf
31000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
0.96

e - ISO Factor2
0.61

Y - ISO Factor3
0.99

G1 - Heat Generation Factor (Roller-Raceway)
123.7

G2 - Heat Generation Factor (Rib-Roller End)
57.1

Cg - Geometry Factor4
0.144
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.


 MORE IMAGES 

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-S

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-T



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers