All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TSF (Tapered Single with Flange) > Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial > Part Number 9275 - 9221-B  

Part Number 9275 - 9221-B, Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
9200

Cone Part Number
9275

Cup Part Number
9221-B

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
2 3/8 in
60.325 mm

D - Cup Outer Diameter
6-3/8 in
161.925 mm

D1 - Flange Outer Diameter
6.7500 in
171.450 mm

B - Cone Width
1.8125 in
46.038 mm

C - Cup Width
1.1875 in
30.163 mm

C1 - Cup Flange Width
0.2810 in
7.137 mm

T1 - Bearing Width to Flange
0.9060 in
23.012 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.600 mm

r - Cup Backface "To Clear" Radius2
0.130 in
3.30 mm

da - Cone Frontface Backing Diameter
3.5 in
89 mm

db - Cone Backface Backing Diameter
4.02 in
102 mm

Da - Cup Frontface Backing Diameter
6.04 in
153.42 mm

Ab - Cage-Cone Frontface Clearance
0.12 in
3 mm

Aa - Cage-Cone Backface Clearance
0.27 in
6.9 mm

a - Effective Center Location3
0.07 in
1.8 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
17300 lbf
77100 N

C1 - Dynamic Radial Rating (1 million revolutions)2
66900 lbf
298000 N

C0 - Static Radial Rating
74200 lbf
330000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
21000 lbf
93600 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
0.82

e - ISO Factor2
0.71

Y - ISO Factor3
0.85

G1 - Heat Generation Factor (Roller-Raceway)
102.5

G2 - Heat Generation Factor (Rib-Roller End)
16.1

Cg - Geometry Factor4
0.0984
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.


 MORE IMAGES 

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-S

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-T



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers