All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TSF (Tapered Single with Flange) > Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial > Part Number A2031 - A2126-B  

Part Number A2031 - A2126-B, Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
A2000

Cone Part Number
A2031

Cup Part Number
A2126-B

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
0.3125 in
7.938 mm

D - Cup Outer Diameter
1.2595 in
31.991 mm

D1 - Flange Outer Diameter
1.3845 in
35.166 mm

B - Cone Width
0.4246 in
10.785 mm

C - Cup Width
0.3125 in
7.938 mm

C1 - Cup Flange Width
0.0940 in
2.388 mm

T1 - Bearing Width to Flange
0.1755 in
4.458 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.02 in
0.50 mm

r - Cup Backface "To Clear" Radius2
0.050 in
1.3 mm

da - Cone Frontface Backing Diameter
0.49 in
12.5 mm

db - Cone Backface Backing Diameter
0.51 in
13 mm

Da - Cup Frontface Backing Diameter
1.24 in
31.50 mm

Ab - Cage-Cone Frontface Clearance
0.09 in
2.3 mm

Aa - Cage-Cone Backface Clearance
-0.03 in
-0.8 mm

a - Effective Center Location3
-0.12 in
-3 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
630 lbf
2800 N

C1 - Dynamic Radial Rating (1 million revolutions)2
2430 lbf
10800 N

C0 - Static Radial Rating
2070 lbf
9230 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
437 lbf
1940 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.44

e - ISO Factor2
0.41

Y - ISO Factor3
1.48

G1 - Heat Generation Factor (Roller-Raceway)
1.7

G2 - Heat Generation Factor (Rib-Roller End)
3.2

Cg - Geometry Factor4
0.0308
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.


 MORE IMAGES 

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-S

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-T



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers