All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TSF (Tapered Single with Flange) > Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial > Part Number H715348 - H715310-B  

Part Number H715348 - H715310-B, Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
H715300

Cone Part Number
H715348

Cup Part Number
H715310-B

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
3.0625 in
77.788 mm

D - Cup Outer Diameter
5.5000 in
139.700 mm

D1 - Flange Outer Diameter
6 in
152.400 mm

B - Cone Width
1.8125 in
46.038 mm

C - Cup Width
1.4375 in
36.513 mm

C1 - Cup Flange Width
0.3125 in
7.938 mm

T1 - Bearing Width to Flange
0.6875 in
17.463 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.600 mm

r - Cup Backface "To Clear" Radius2
0.130 in
3.30 mm

da - Cone Frontface Backing Diameter
3.46 in
88 mm

db - Cone Backface Backing Diameter
3.9 in
99 mm

Da - Cup Frontface Backing Diameter
5.35 in
135.89 mm

Ab - Cage-Cone Frontface Clearance
0.11 in
2.8 mm

Aa - Cage-Cone Backface Clearance
0.14 in
3.6 mm

a - Effective Center Location3
-0.34 in
-8.6 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
18600 lbf
82700 N

C1 - Dynamic Radial Rating (1 million revolutions)2
71700 lbf
319000 N

C0 - Static Radial Rating
91000 lbf
405000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
15100 lbf
67000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.24

e - ISO Factor2
0.47

Y - ISO Factor3
1.27

G1 - Heat Generation Factor (Roller-Raceway)
147

G2 - Heat Generation Factor (Rib-Roller End)
32.8

Cg - Geometry Factor4
0.0993
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.


 MORE IMAGES 

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-S

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-T



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers