All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TSF (Tapered Single with Flange) > Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial > Part Number LM567949 - LM567910-B  

Part Number LM567949 - LM567910-B, Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
LM567900

Cone Part Number
LM567949

Cup Part Number
LM567910-B

Design Unit
Inch

Cage Material
Stamped Steel

Related Assembly Number(s)
LM567949-90011
LM567949-90016
LM567949-90019


Dimensions

d - Bore
16.0000 in
406.400 mm

D - Cup Outer Diameter
21.6250 in
549.275 mm

D1 - Flange Outer Diameter
22.1836 in
563.463 mm

B - Cone Width
3.3125 in
84.138 mm

C - Cup Width
2.4375 in
61.913 mm

C1 - Cup Flange Width
0.5625 in
14.288 mm

T1 - Bearing Width to Flange
1.5000 in
38.100 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.25 in
6.4 mm

r - Cup Backface "To Clear" Radius2
0.130 in
3.30 mm

da - Cone Frontface Backing Diameter
16.81 in
427 mm

db - Cone Backface Backing Diameter
17.2 in
437 mm

Da - Cup Frontface Backing Diameter
21.02 in
531.11 mm

Ab - Cage-Cone Frontface Clearance
0.19 in
4.8 mm

Aa - Cage-Cone Backface Clearance
0.45 in
11.4 mm

a - Effective Center Location3
0.61 in
15.5 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
83500 lbf
371000 N

C1 - Dynamic Radial Rating (1 million revolutions)2
322000 lbf
1430000 N

C0 - Static Radial Rating
704000 lbf
3130000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
58200 lbf
259000 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.43

e - ISO Factor2
0.41

Y - ISO Factor3
1.47

G1 - Heat Generation Factor (Roller-Raceway)
3800

G2 - Heat Generation Factor (Rib-Roller End)
427

Cg - Geometry Factor4
0.214
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.


 MORE IMAGES 

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-S

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-T



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers