All Product Types > ENGINEERED BEARINGS > Tapered Roller Bearings > Tapered Roller Bearings - TSF (Tapered Single with Flange) > Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial > Part Number LM814849 - LM814810-B  

Part Number LM814849 - LM814810-B, Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

Like the TS bearing design, the TSF design consists of two main separable parts: the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft. TSF bearings have flanged cups to facilitate axial location and accurately align seals in through-bored housings.




Specifications  · Dimensions  · Abutment and Fillet Dimensions  · Basic Load Ratings  · Factors

Specifications

Series
LM814800

Cone Part Number
LM814849

Cup Part Number
LM814810-B

Design Unit
Inch

Cage Material
Stamped Steel


Dimensions

d - Bore
3.0625 in
77.788 mm

D - Cup Outer Diameter
4.6250 in
117.475 mm

D1 - Flange Outer Diameter
4.8084 in
122.133 mm

B - Cone Width
1.0000 in
25.400 mm

C - Cup Width
0.7500 in
19.050 mm

C1 - Cup Flange Width
0.1875 in
4.763 mm

T1 - Bearing Width to Flange
0.4375 in
11.113 mm


Abutment and Fillet Dimensions

R - Cone Backface "To Clear" Radius1
0.14 in
3.600 mm

r - Cup Backface "To Clear" Radius2
0.130 in
3.30 mm

da - Cone Frontface Backing Diameter
3.35 in
85 mm

db - Cone Backface Backing Diameter
3.58 in
91 mm

Da - Cup Frontface Backing Diameter
4.60 in
116.84 mm

Ab - Cage-Cone Frontface Clearance
0.09 in
2.3 mm

Aa - Cage-Cone Backface Clearance
0.08 in
2 mm

a - Effective Center Location3
0.09 in
2.3 mm
1 These maximum fillet radii will be cleared by the bearing corners.
2 These maximum fillet radii will be cleared by the bearing corners.
3 Negative value indicates effective center inside cone backface.


Basic Load Ratings

C90 - Dynamic Radial Rating (90 million revolutions)1
6870 lbf
30600 N

C1 - Dynamic Radial Rating (1 million revolutions)2
26500 lbf
118000 N

C0 - Static Radial Rating
41200 lbf
183000 N

Ca90 - Dynamic Thrust Rating (90 million revolutions)3
5990 lbf
26700 N
1 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values.
2 Based on 1 x 106 revolutions L10 life, for the ISO life calculation method.
3 Based on 90 x 106 revolutions L10 life, for The Timken Company life calculation method. C90 and Ca90 are radial and thrust values for a single-row, C90(2) is the two-row radial value.


Factors

K - Factor1
1.15

e - ISO Factor2
0.51

Y - ISO Factor3
1.18

G1 - Heat Generation Factor (Roller-Raceway)
88.6

G2 - Heat Generation Factor (Rib-Roller End)
36.6

Cg - Geometry Factor4
0.124
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 Geometry constant for Lubrication Life Adjustment Factor a3l.


 MORE IMAGES 

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-S

·  Timken_TRB_1ROWASSY_TSF_32312BM-90KM2-T



 DOWNLOADS 

Bearing Life Calculation Tool

Bearing Dimensional Tolerances

Tools and Guides for Engineers