All Product Types > INDUSTRIAL MOTION PRODUCTS > Couplings & Power Transmission Parts Catalog > Shaft Locking Devices > External Shaft Locking Devices (SLD 900) > SLD 900 Series - Metric > Part Number 69790410601  

Part Number 69790410601, SLD 900 Series - Metric

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • Self-centering
  • Exceptional concentricity 
  • Suitable/recommended for hollow shafts
  • Axial hub position fixed during clamping
  • Metric shafts 14 mm to 240 mm  
  • Larger sizes on request
  • 22 - 118,010 ft-lb





Specifications  · Dimensional Data  · Performance Data  · Features

Specifications

Description 
SLD-900-MM-115

Coupling Size
SLD900

Type
External

Collar Material
Silver/Metallic

Weight
13.89 lb

# of Locking Screws
9

Locking Screws Size
M10

Screw Type
Hex Head Bolt

Screw Material
Steel

Style
Self Centering

Application
External Shaft Locking Device


Dimensional Data

Hub Outside Diameter (Dimension d)
115.00 mm
4.528 in

Tolerance of Hub Outside Diameter (T3)
+0 - 0.0021 in

Shaft Size
115.00 mm

Shaft Locking Device Outside Diameter (Dimension D)
188.01 mm
7.402 in

Thrust Rings Width at Relaxed State (Dimension B)
50.00 mm
1.969 in

Contact Length (Dimension l)
39.00 mm
1.535 in

Locking Screw Size (Dimension T)
M10

Shaft Diameter (Dimension ds)
3.150 in

Gap Width at Relaxed State (Dimension e)
0.217 in

Max. Diametrical Clearance (Dimension C)
0.002 in

Total Thrust Rings Width at Relaxed State (Dimension L)
2.244 in
57.00 mm

Disc Outside Diameter (Dimension D)
188.01 mm
7.402 in

Cubic inches
160.79657 in³
4084.23285 mm³


Performance Data

Max. Transmissible Torque (at low end of shaft diameter range)
6269.00 ft·lb

Max. Transmissible Torque (min to max shaft diameter)
6269 to 8851 ft·lb

Screw Tightening Torque
44.00 ft·lb


Features

Features 
Versus Traditional Keyed Connections
  • No Backlash due to fit tolerances
  • No impact effect from reversing loads
  • Ability to adjust axial position and angular timing
  • No fretting corrosion due to movement at the fit interface
Versus Traditional Interference Fits
  • Easier and quicker to install
  • Higher contact pressures can transmit greater torques
  • Easy and quick to remove without damaging the shaft or hub - even after years of service
Design Benefits
  • Eliminate cost of machining keyways or splines
  • Reduce the shaft stress by removing keyways or splines
  • Eliminating keyways often allows the use of a smaller diameter shaft
  • Can place anywhere on shaft, and allows for easy angular timing
  • Easy removal without damaging the shaft or hub means easier maintenance for your customer


 DOWNLOADS 

Shaft Locking Device Catalog (full catalog)
(PDF, 0KB)

Shaft Locking Device Applications Guide
(PDF, 0KB)