All Product Types > INDUSTRIAL MOTION PRODUCTS > Couplings & Power Transmission Parts Catalog > Shaft Locking Devices > External Shaft Locking Devices (SLD 900) > SLD 900 Series - Metric > Part Number 69790498011  

Part Number 69790498011, SLD 900 Series - Metric

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • Self-centering
  • Exceptional concentricity 
  • Suitable/recommended for hollow shafts
  • Axial hub position fixed during clamping
  • Metric shafts 14 mm to 240 mm  
  • Larger sizes on request
  • 22 - 118,010 ft-lb





Specifications  · Dimensional Data  · Performance Data  · Features

Specifications

Description 
SLD-900-MM-30

Coupling Size
SLD900

Type
External

Collar Material
Silver/Metallic

Weight
0.66 lb

# of Locking Screws
6

Locking Screws Size
M5

Screw Type
Hex Head Bolt

Screw Material
Steel

Style
Self Centering

Application
External Shaft Locking Device


Dimensional Data

Hub Outside Diameter (Dimension d)
30.00 mm
1.181 in

Tolerance of Hub Outside Diameter (T3)
+0 - 0.0013 in

Shaft Size
30.00 mm

Shaft Locking Device Outside Diameter (Dimension D)
60.00 mm
2.362 in

Thrust Rings Width at Relaxed State (Dimension B)
21.00 mm
0.827 in

Contact Length (Dimension l)
16.00 mm
0.630 in

Locking Screw Size (Dimension T)
M5

Shaft Diameter (Dimension ds)
0.866 in

Gap Width at Relaxed State (Dimension e)
0.098 in

Max. Diametrical Clearance (Dimension C)
0.001 in

Total Thrust Rings Width at Relaxed State (Dimension L)
0.984 in
25.00 mm

Disc Outside Diameter (Dimension D)
59.99 mm
2.362 in

Cubic inches
7.90863 in³
200.87919 mm³


Performance Data

Max. Transmissible Torque (at low end of shaft diameter range)
177.00 ft·lb

Max. Transmissible Torque (min to max shaft diameter)
177 to 306 ft·lb

Screw Tightening Torque
3.00 ft·lb


Features

Features 
Versus Traditional Keyed Connections
  • No Backlash due to fit tolerances
  • No impact effect from reversing loads
  • Ability to adjust axial position and angular timing
  • No fretting corrosion due to movement at the fit interface
Versus Traditional Interference Fits
  • Easier and quicker to install
  • Higher contact pressures can transmit greater torques
  • Easy and quick to remove without damaging the shaft or hub - even after years of service
Design Benefits
  • Eliminate cost of machining keyways or splines
  • Reduce the shaft stress by removing keyways or splines
  • Eliminating keyways often allows the use of a smaller diameter shaft
  • Can place anywhere on shaft, and allows for easy angular timing
  • Easy removal without damaging the shaft or hub means easier maintenance for your customer


 DOWNLOADS 

Shaft Locking Device Catalog (full catalog)
(PDF, 0KB)

Shaft Locking Device Applications Guide
(PDF, 0KB)