All Product Types > INDUSTRIAL MOTION PRODUCTS > Couplings & Power Transmission Parts Catalog > Shaft Locking Devices > External Shaft Locking Devices (SLD 900) > SLD 900 Series - Metric > Part Number 69790498021  

Part Number 69790498021, SLD 900 Series - Metric

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • Self-centering
  • Exceptional concentricity 
  • Suitable/recommended for hollow shafts
  • Axial hub position fixed during clamping
  • Metric shafts 14 mm to 240 mm  
  • Larger sizes on request
  • 22 - 118,010 ft-lb





Specifications  · Dimensional Data  · Performance Data  · Features

Specifications

Description 
SLD-900-MM-100

Coupling Size
SLD900

Type
External

Collar Material
Silver/Metallic

Weight
10.14 lb

# of Locking Screws
12

Locking Screws Size
M10

Screw Type
Hex Head Bolt

Screw Material
Steel

Style
Self Centering

Application
External Shaft Locking Device


Dimensional Data

Hub Outside Diameter (Dimension d)
100.00 mm
3.937 in

Tolerance of Hub Outside Diameter (T3)
+0 - 0.0021 in

Shaft Size
100.00 mm

Shaft Locking Device Outside Diameter (Dimension D)
170.00 mm
6.693 in

Thrust Rings Width at Relaxed State (Dimension B)
44.00 mm
1.732 in

Contact Length (Dimension l)
34.00 mm
1.339 in

Locking Screw Size (Dimension T)
M8

Shaft Diameter (Dimension ds)
2.756 in

Gap Width at Relaxed State (Dimension e)
0.197 in

Max. Diametrical Clearance (Dimension C)
0.002 in

Total Thrust Rings Width at Relaxed State (Dimension L)
1.949 in
49.50 mm

Disc Outside Diameter (Dimension D)
170.00 mm
6.693 in

Cubic inches
103.37903 in³
2625.82740 mm³


Performance Data

Max. Transmissible Torque (at low end of shaft diameter range)
5089.00 ft·lb

Max. Transmissible Torque (min to max shaft diameter)
5089 to 6638 ft·lb

Screw Tightening Torque
22.00 ft·lb


Features

Features 
Versus Traditional Keyed Connections
  • No Backlash due to fit tolerances
  • No impact effect from reversing loads
  • Ability to adjust axial position and angular timing
  • No fretting corrosion due to movement at the fit interface
Versus Traditional Interference Fits
  • Easier and quicker to install
  • Higher contact pressures can transmit greater torques
  • Easy and quick to remove without damaging the shaft or hub - even after years of service
Design Benefits
  • Eliminate cost of machining keyways or splines
  • Reduce the shaft stress by removing keyways or splines
  • Eliminating keyways often allows the use of a smaller diameter shaft
  • Can place anywhere on shaft, and allows for easy angular timing
  • Easy removal without damaging the shaft or hub means easier maintenance for your customer


 DOWNLOADS 

Shaft Locking Device Catalog (full catalog)
(PDF, 0KB)

Shaft Locking Device Applications Guide
(PDF, 0KB)