Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information
FLAMM Type (Flex-Flex All-Metal Labyrinth Seal Mill Motor Coupling) Hubs - Rough Stock Bore

The FLAMM Type coupling consists of one FLAMM Mill Type hub, one standard FLA Type flex hub, two standard FLA Type flex sleeves, and one accessory kit. This coupling is supplied with exposed bolts as standard, with shrouded bolts are available upon request through size 5.5.

The FLAMM Type Mill hub accommodates AISE Mill Motor frame sizes (with the two sleeves and second hub being standard FLA Type).
Unit of Measure

Specifications

Description 

 N/A FLAMM-1.5-HUB-RSB

Hub Style

 N/A Exposed Bolt

Type

 N/A Gear Coupling Hubs

Hub Material

 N/A All Metal

Style

 N/A Unbored

Color

 N/A Metallic

Bore Type

 N/A Rough Stock Bore

Coupling Type

 N/A Gear

Weight

 N/A 4.69 lb

Complete Coupling Weight

 N/A 24.00 lb

Dimensional Data

Size

 N/A 1 1/2

Max. Bore (Dimensions ID1/ID2)

 N/A 1.625 in41 mm

Dimension BSE1

 N/A 0.160 in4.06 mm

Dimension D

 N/A 3.970 in100.84 mm

Dimension FD

 N/A 6.00 in152.40 mm

Dimension HD

 N/A 2.190 in55.63 mm

Dimension HD1

 N/A 3.970 in100.84 mm

Dimension LTB1

 N/A 1.840 in46.74 mm

Distance between Shaft Ends (Dimension BSE)

 N/A 0.13 in3.30 mm

Cubic inches

 N/A 17.07412 in³

Performance Data

Nominal Torque

 N/A 18900 in·lb2140 N·m

Max. Speed (Unbalanced)

 N/A 5500 rpm

Max. Speed (Balanced)

 N/A 8250.00 rpm

Parallel Misalignment

 N/A 0.280 in

Max. Angular Misalignment

 N/A 1.50º per Gear Mesh

Features

Features 

 N/A
  • Patented Vari-Crown® tooth form for long life on Flex Half
  • Standard 20° pressure angle
  • Heat treated bolts for greater strength
  • Corrosion resistant bolts and nuts for ease of maintenance
  • Provides parallel, angular misalignment and end float
  • Flex Half coupling interchangeable with industry standards
  • Long Universal Hub used for A.I.S.E. Motor Frames

Notes

Notes 

 N/A
  • Bore taper is 1-1/4 inch per foot on diameter.
  • Exposed Bolt Design is standard.
  • Shrouded Bolt Design available upon request for sizes 1.5 through 5.
  • Puller Holes are standard on sizes 4 through 7.
  • Puller Holes are available for sizes 1.5 through 3.5 at an additional charge.
  • Interference bores with no set screws are standard unless otherwise specified.
  • Inch bore and keyway tolerances conform to AGMA 9002-B04.
  • For metric bore and keyway tolerances, consult Lovejoy Engineering Section.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.