Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

d - Bore

 N/A 60 mm

Bore_Taper

 N/A 1/12

Cage Type

 N/A EM

UPC Code

 N/A 087796233881

Cage Material

 N/A Brass

Superseded Part

 N/A 22312KYMW33W800C4

Dimensions

D - Outer Diameter

 N/A 5.1178 in129.993 mm

B' - Inner Ring Width

 N/A 1.811 in46 mm

B - Outer Ring Width

 N/A 1.811 in46 mm

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 N/A 0.080 in2 mm
r - Outer Ring "To Clear" Radius2 N/A 0.08 in2 mm

da - Inner Ring Backing Diameter

 N/A 77 mm3.000 in

Da - Outer Ring Backing Diameter

 N/A 117 mm4.600 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 69000 lbf307000 N

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 68800 lbf306000 N

Factors

e - ISO Factor3 N/A 0.34
Y0 - ISO Factor4 N/A 1.93
Y1 - ISO Factor5 N/A 1.98
Y2 - ISO Factor6 N/A 2.94

Reference Thermal Speed Rating (Grease)

 N/A 4100 rpm
Reference Thermal Speed Rating (Oil)7 N/A 4900 rpm
Cg - Geometry Factor8 N/A 0.0532
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.