Batch CAD Cart (0)
  • Cart is empty
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

Metric

d - Bore

260 mm

Bore_Taper

1/12

Cage Type

EMB

UPC Code

087796176942

Cage Material

Brass

Superseded Part

23152KYMBW40IW534C4

Dimensions

D - Outer Diameter

440 mm17.323 in

B' - Inner Ring Width

144 mm5.669 in

B - Outer Ring Width

144 mm5.669 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 3 mm0.120 in
r - Outer Ring "To Clear" Radius2 3 mm0.12 in

da - Inner Ring Backing Diameter

301.000 mm11.8000 in

Da - Outer Ring Backing Diameter

400 mm15.700 in

Basic Load Ratings

C0 - Static Radial Rating

3930000 N885000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

2680000 N603000 lbf

Factors

e - ISO Factor3 0.3
Y0 - ISO Factor4 2.18
Y1 - ISO Factor5 2.23
Y2 - ISO Factor6 3.31

Reference Thermal Speed Rating (Grease)

830 rpm
Reference Thermal Speed Rating (Oil)7 930 rpm
Cg - Geometry Factor8 0.1162
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.