Batch CAD Cart (0)
  • Cart is empty
  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).
Unit of Measure

Specifications

Bearing Bore

N/A 170 mm

Locknut

N/A AN 34

Lockwasher

N/A W 34

Threads

Major Diameter

N/A 169.14 mm6.659 in

Threads No. per Inch

N/A 8

Shaft

Relief Diameter A

N/A 164.69 mm6.484 in

Diameter S-3

N/A 163.51 mm6.4375 in
W1 N/A 6.76 mm0.266 in
L2 N/A 24.59 mm0.968 in
H3 N/A 6 mm0.234 in
S4 N/A 19.05 mm0.75 in
M5 N/A 9.53 mm0.375 in

Locknut

C1

N/A 219.99 mm8.661 in

D

N/A 27.25 mm1.073 in

Lockwasher

Q

N/A 3.71 mm0.146 in

R

N/A 171.81 mm6.764 in

B

N/A 230.2 mm9.063 in

s

N/A 18.16 mm0.715 in
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.