Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Hexadrive Series Model HLA-7 Adjustable Pulleys w/ Hexact Linear Actuation Method - Imperial
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > INDUSTRIAL MOTION PRODUCTS > Couplings & Power Transmission Parts Catalog > Variable Speed Hexadrive Series Pulleys > Hexact Linear Actuation Method > Hexadrive Series Model HLA-7 Adjustable Pulleys w/ Hexact Linear Actuation Method - Imperial > Part Number 68514435866  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number 68514435866, Hexadrive Series Model HLA-7 Adjustable Pulleys w/ Hexact Linear Actuation Method - Imperial


Hexact Linear Actuation Method
    The HLA adjustable pulley can be used in place of the standard “HM” pulley where an external mechanical control is available. Typical control methods include hydraulic cylinder, air cylinder, and lever. The adapter nut located on the end of the HLA pulley will accept a threaded rod or a clevis with cross pins. The actuator linkage must be on the center line of the pulley, but radial freedom is required to relieve loads caused by misalignment of the linkage. Actuation rate (closing the moveable flange) should not exceed 2-1/2 inches per minute.

    To specify the correct pulley, simply substitute the HLA prefix for the HM. For example, the Model HLA-7 pulley has the same drive characteristics as the Model HM-7 handw heel-type pulley. Refer to the adjacent chart for dimensional information. A torque arm bracket is NOT required for the HLA drive.




Unit of Measure: Imperial Metric Both

Specifications  · Dimensional Data

Specifications

Description 
HLA-7-1-3/8-PULLEY

Model
HLA-7

Type
Adjustable Center - Driver

Belt Size
2926V

Weight
25.00 lb

UPC Number
35866


Dimensional Data

Bore Diameter 
1 3/8 in

Outside Diameter (Dimension A)
10.000 in

Belt Top Width (Dimension B)
1.810 in

Dimension C
0.800 in
20.32 mm

Distance at Min. PD (Dimension D)
3.590 in

Bore Depth (Dimension E)
6.000 in

Max. Opening Distance (Dimension F)
10.170 in

Min. Opening Distance (Dimension G)
8.750 in

Thru Hole (Dimension H)
0.390 in

Distance Across Flats (Dimension I)
1.310 in

Nut Diameter (Dimension J)
1.380 in

Max. Thrust (Dimension K)
765.00 lb

Diameter (Dimension L)
3.750 in

Thread (Dimension M)
3/1-10 UNC

Max. Depth (Dimension N)
0.87 in Diameter x 1.44 in

Flat Length (Dimension P)
1.000 in

Dimension R
1.250 in
31.75 mm

Max. Depth (Dimension S)
2.500 in

Cubic inches
1017.00000 in³


 MORE IMAGES 

·  WB Series Typical Adjustable Center Drive

·  Connection - Hexadrive HLA Series Adjustable Pulleys


Add To Cart Request Quote
<