All Product Types > INDUSTRIAL MOTION PRODUCTS > Couplings & Power Transmission Parts Catalog > Shaft Locking Devices > Internal Shaft Locking Devices (SLD 1500, 1850, 1750, 1350, 1450, 2600, 1900, & 350) > SLD 1900 Series - Inch (Imperial) > Part Number 69790498486  

Part Number 69790498486, SLD 1900 Series - Inch (Imperial)

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • Medium torque
  • Allows smaller diameter hubs
  • Exceptional concentricity
  • Self-centering
  • Axial hub position fixed during clamping
  • Metric shafts 6 mm to 130 mm
  • Inch shafts 3/4 to 2-15/16 inch
  • Larger sizes on request
  • 10 - 18,618 ft-lb




Specifications  · Dimensional Data  · Performance Data  · Features

Specifications

Description 
SLD-1900-IN-1-3/4

Coupling Size
SLD 1900

Type
Internal

Collar Material
Silver/Metallic

Weight
2.65 lb

Screw Type
Socket Head Cap Screw

Screw Material
Steel

Style
Self Centering

Application
Internal Shaft Locking Device

# of Locking Screws
8


Dimensional Data

Shaft Size
1 3/4 in

Hub Outside Diameter (Dimension d)
1.750 in
44.45 mm

Tolerance of Shaft (T1)
+0 -0.0016 in

Shaft Locking Device Outside Diameter (Dimension D)
2.323 in
59.00 mm

Tolerance of Hub Bore (T2)
-0 +0.0018 in

Thrust Rings Width at Relaxed State (Dimension B)
2.559 in
65.00 mm

Locking Screw Size (Dimension T)
M8

Diameter to Flange (Dimension D1)
3.346 in
84.99 mm

Contact Length (Dimension l)
1.575 in
40.00 mm

Total Width at Relaxed State (Dimension L)
2.874 in
73.00 mm

Cubic inches
15.50905 in³
393.92986 mm³


Performance Data

Max. Transmissible Axial Force
18432.00 lbf

Max. Transmissible Torque
1296.00 ft·lb

Screw Tightening Torque
30.00 ft·lb

Pressure on The Hub
9414.00 psi

Pressure on The Shaft
8473.00 psi


Features

Features 
Versus Traditional Keyed Connections
  • No Backlash due to fit tolerances
  • No impact effect from reversing loads
  • Ability to adjust axial position and angular timing
  • No fretting corrosion due to movement at the fit interface
Versus Traditional Interference Fits
  • Easier and quicker to install
  • Higher contact pressures can transmit greater torques
  • Easy and quick to remove without damaging the shaft or hub - even after years of service
Design Benefits
  • Eliminate cost of machining keyways or splines
  • Reduce the shaft stress by removing keyways or splines
  • Eliminating keyways often allows the use of a smaller diameter shaft
  • Can place anywhere on shaft, and allows for easy angular timing
  • Easy removal without damaging the shaft or hub means easier maintenance for your customer


 DOWNLOADS 

Shaft Locking Device Catalog (full catalog)
(PDF, 0KB)

Shaft Locking Device Applications Guide
(PDF, 0KB)