3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

Batch CAD Cart (0)
  • Cart is empty
  • Low torque
  • Small radial dimensions
  • Can be combined for greater torque capacity
  • Metric shafts 6mm to 150mm
  • Split/cut ring
  • Larger sizes on request
  • 1.73 - 9,104 ft-lb
Unit of Measure



N/A SLD 350 S MM 8X11

Coupling Size

N/A SLD350 S


N/A Internal

Collar Material

N/A Silver/Metallic


N/A 0.00 lb

Screw Material

N/A Steel


N/A Low Torque


N/A Internal Shaft Locking Device

Dimensional Data

Shaft Size 

N/A 8 x 11 mm

Hub Outside Diameter (Dimension d)

N/A 0.315 in8.00 mm

Tolerance of Shaft (T1)

N/A +0 -0.0003 in

Shaft Locking Device Outside Diameter (Dimension D)

N/A 0.433 in11.00 mm

Tolerance of Hub Bore (T2)

N/A -0 +0.0007 in

Recommended Distance to Clamp Device - 1 Element (Dimension N)

N/A 0.118 in

Recommended Distance to Clamp Device - 2 Elements (Dimension N)

N/A 0.118 in

Recommended Distance to Clamp Device - 3 Elements (Dimension N)

N/A 0.118 in

Recommended Distance to Clamp Device - 4 Elements (Dimension N)

N/A 0.157 in

Total Width at Relaxed State (Dimension L)

N/A 0.177 in4.50 mm

Cubic inches

N/A 0.03319 in³0.84291 mm³

Performance Data

Max. Transmissible Axial Force

N/A 265.00 lbf

Max. Transmissible Torque

N/A 3.47 ft·lb

Pressure on The Hub

N/A 13053.00 psi

Pressure on The Shaft

N/A 15664.00 psi

Preload Force Required to Generate Max. Transmissible Torque (FA)

N/A 1349.00 lb



N/A Versus Traditional Keyed Connections
  • No Backlash due to fit tolerances
  • No impact effect from reversing loads
  • Ability to adjust axial position and angular timing
  • No fretting corrosion due to movement at the fit interface
Versus Traditional Interference Fits
  • Easier and quicker to install
  • Higher contact pressures can transmit greater torques
  • Easy and quick to remove without damaging the shaft or hub - even after years of service
Design Benefits
  • Eliminate cost of machining keyways or splines
  • Reduce the shaft stress by removing keyways or splines
  • Eliminating keyways often allows the use of a smaller diameter shaft
  • Can place anywhere on shaft, and allows for easy angular timing
  • Easy removal without damaging the shaft or hub means easier maintenance for your customer
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.