Batch CAD Cart (0)
  • Cart is empty
  • Low torque
  • Small radial dimensions
  • Can be combined for greater torque capacity
  • Metric shafts 6mm to 150mm
  • Also available with cut ring
  • Larger sizes on request
  • 1.73 - 9,104 ft-lb
Unit of Measure

Specifications

Description 

SLD-350-MM-22X26

Coupling Size

SLD350

Type

Internal

Collar Material

Silver/Metallic

Weight

0.02 lb

Screw Material

Steel

Style

Low Torque

Application

Internal Shaft Locking Device

Dimensional Data

Shaft Size 

22 x 26 mm

Hub Outside Diameter (Dimension d)

0.866 in22.00 mm

Tolerance of Shaft (T1)

+0 -0.0005 in

Shaft Locking Device Outside Diameter (Dimension D)

1.024 in26.00 mm

Tolerance of Hub Bore (T2)

-0 +0.0008 in

Recommended Distance to Clamp Device - 1 Element (Dimension N)

0.118 in

Recommended Distance to Clamp Device - 2 Elements (Dimension N)

0.157 in

Recommended Distance to Clamp Device - 3 Elements (Dimension N)

0.157 in

Recommended Distance to Clamp Device - 4 Elements (Dimension N)

0.197 in

Total Width at Relaxed State (Dimension L)

0.248 in6.30 mm

Cubic inches

0.26005 in³6.60519 mm³

Performance Data

Max. Transmissible Axial Force

1135.00 lbf

Max. Transmissible Torque

41.00 ft·lb

Pressure on The Hub

13053.00 psi

Pressure on The Shaft

16099.00 psi

Preload Force Required to Generate Max. Transmissible Torque (FA)

5485.00 lb

Features

Features 

Versus Traditional Keyed Connections
  • No Backlash due to fit tolerances
  • No impact effect from reversing loads
  • Ability to adjust axial position and angular timing
  • No fretting corrosion due to movement at the fit interface
Versus Traditional Interference Fits
  • Easier and quicker to install
  • Higher contact pressures can transmit greater torques
  • Easy and quick to remove without damaging the shaft or hub - even after years of service
Design Benefits
  • Eliminate cost of machining keyways or splines
  • Reduce the shaft stress by removing keyways or splines
  • Eliminating keyways often allows the use of a smaller diameter shaft
  • Can place anywhere on shaft, and allows for easy angular timing
  • Easy removal without damaging the shaft or hub means easier maintenance for your customer