Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
  • The chart below shows dimensions for locknuts and lockplates used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222,223 etc.).
Unit of Measure

Specifications

Bearing Bore

 N/A 950 mm

Locknut

 N/A N 950

Lockplate

 N/A P 950

Threads

Major Diameter

 N/A 950.21 mm37.41 in

Threads No. per Inch

 N/A 3

Shaft

Relief Diameter A

 N/A 938.68 mm36.956 in

Diameter S-3

 N/A 933.5 mm36 3/4 in
L1 N/A 104.78 mm4.125 in
H2 N/A 19.05 mm0.750 in
S3 N/A 50.8 mm2 in

Locknut/Lockplate

C1

 N/A 1092.33 mm43.005 in

D

 N/A 100.41 mm3.953 in

G

 N/A 62.99 mm2.48 in
H14 N/A 25.65 mm1.01 in

R

 N/A 692.2 mm27.25 in

F

 N/A 117.50 mm4.625 in
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 4 Tolerance ±0.25 mm (±0.010 in)