Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).
Unit of Measure

Specifications

Bearing Bore

 N/A 35 mm

Locknut

 N/A N 07

Lockwasher

 N/A W 07

Threads

Major Diameter

 N/A 34.95 mm1.376 in

Threads No. per Inch

 N/A 18

Shaft

Relief Diameter A

 N/A 32.94 mm1.297 in

Diameter S-3

 N/A 31.75 mm1.25 in
W1 N/A 2.77 mm0.109 in
L2 N/A 10.34 mm0.407 in
H3 N/A 2.4 mm0.094 in
S4 N/A 4.78 mm0.188 in
M5 N/A 3.18 mm0.125 in

Locknut

C1

 N/A 52.53 mm2.068 in

D

 N/A 11.38 mm0.448 in

Lockwasher

Q

 N/A 1.02 mm0.04 in

R

 N/A 35.46 mm1.396 in

B

 N/A 57.150 mm2.2500 in

s

 N/A 4.47 mm0.176 in
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)