Aerospace / Military Commercial / Industrial Technical Resources Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0)
  • Cart is empty
  • The chart below shows dimensions for locknuts and lockwashers used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222 and 223 etc.).
Unit of Measure

Specifications

Bearing Bore

N/A 55 mm

Locknut

N/A N 11

Lockwasher

N/A W 11

Threads

Major Diameter

N/A 54.79 mm2.157 in

Threads No. per Inch

N/A 18

Shaft

Relief Diameter A

N/A 52.78 mm2.078 in

Diameter S-3

N/A 52.39 mm2.0625 in
W1 N/A 3.58 mm0.141 in
L2 N/A 11.89 mm0.468 in
H3 N/A 3.2 mm0.125 in
S4 N/A 7.92 mm0.312 in
M5 N/A 3.96 mm0.156 in

Locknut

C1

N/A 75.54 mm2.974 in

D

N/A 12.95 mm0.51 in

Lockwasher

Q

N/A 1.35 mm0.053 in

R

N/A 55.42 mm2.182 in

B

N/A 78.97 mm3.109 in

s

N/A 7.37 mm0.29 in
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 4 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 5 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)