Optional plating on race outside diameter can be added by adding suffix "P" for zinc nickel or cad plating or suffix "E" for zinc nickel plating (ex.: ANC-3TP/ANC-3TE)
PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
Temperature Range: -65°F to + 325°F.
"K" designates Low Torque Bearing fit. No load rotational breakaway torque can be varied to meet specific application requirements.
Bearings can be ordered in an oversize outside diameter condition by adding suffix "D1" (.010") oversize or "D2" (.020") oversize (ex.: ANC-3TD1/ANC-3TD2)
Bearings listed are manufactured to conform to the dimensions, materials and configurations of SAE Specifications AS14101 (grooved) and AS14104 (plain), and are approved for procurement under these specifications.
Unit of Measure
Specifications
Part Number
N/AANC-12TK
SAE Part Number
N/AMS14104-12K
Bearing Type
N/APlain
B - Ball Bore
N/A.7500 in
D - Outside Diameter
N/A1.4375 in
W - Ball Width
N/A.750 in
H - Race Width
N/A.593 in
O - Ball Shoulder Diameter
N/A.920 in
Ball Diameter
N/A1.187 in
a - Misalignment Angle
N/A8 º
Radial Static Limit Load Capacity
N/A46,400 lbs
Axial Static Limit Load Capacity
N/A6,750 lb
Oscillating Load
N/A23,600 lb
No Load Rotational Breakaway Torque
N/A0.0 to 1.0 in·lb
Approximate Brg. Weight
N/A.21 lb
Note
N/AFor dimensional tolerances of listed features, see the PDF version of the catalog under the "View Product Catalogs" tab from the home page.
