Optional plating on race outside diameter can be added by adding suffix "P" for zinc nickel or cad plating or suffix "E" for zinc nickel plating (ex.: ANC-3TP/ANC-3TE)
PTFE Liner - (AT 3200) Permanently bonded to race inside diameter, qualified to SAE-AS81820 Type A.
Temperature Range: -65°F to + 325°F.
"K" designates Low Torque Bearing fit. No load rotational breakaway torque can be varied to meet specific application requirements.
Bearings can be ordered in an oversize outside diameter condition by adding suffix "D1" (.010") oversize or "D2" (.020") oversize (ex.: ANC-3TD1/ANC-3TD2)
Bearings listed are manufactured to conform to the dimensions, materials and configurations of SAE Specifications AS14101 (grooved) and AS14104 (plain), and are approved for procurement under these specifications.
Unit of Measure
Specifications
Part Number
N/AANC-7TGKD1
SAE Part Number
N/AMS14101-7KT
Bearing Type
N/AGrooved
B - Ball Bore
N/A.4375 in
D - Outside Diameter
N/A.9162 in
W - Ball Width
N/A.437 in
H - Race Width
N/A.343 in
O - Ball Shoulder Diameter
N/A.530 in
P - Groove Depth
N/A.035 in
G - Groove Pitch Diameter
N/A.806 in
R - Grooved Radius
N/A.015 in
Ball Diameter
N/A.687 in
a - Misalignment Angle
N/A8 º
Radial Static Limit Load Capacity
N/A13,200 lbs
Axial Static Limit Load Capacity
N/A1,400 lb
Oscillating Load
N/A8,050 lb
No Load Rotational Breakaway Torque
N/A0.0 to 1.0 in·lb
Approximate Brg. Weight
N/A.05 lb
Note
N/AFor dimensional tolerances of listed features, see the PDF version of the catalog under the "View Product Catalogs" tab from the home page.
