Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Inch Straight Bore Mounting Pillow Block SDAF222 and SDAF223 Series
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Mounted SAF Split-Block Spherical Roller Bearings > Inch Straight Bore Mounting Pillow Block SDAF222 and SDAF223 Series > Part Number SDAF 22336  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number SDAF 22336, Inch Straight Bore Mounting Pillow Block SDAF222 and SDAF223 Series


  • Each assembly includes the housing cap and base, cap bolts, bearing, locknut and washer, stabilizing ring, and triple ring seals.
  • To order pillow block housing only, use the numbers listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
  • Assembly and pillow blocks described on this page constitute fixed units.
  • To order float units, specify part number plus suffix "Float" or "FL".
  • If one end closed assembly is required, specify “CL” in assembly number when ordering.
  • All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 22220).

Note: Speed ratings are found in dimension tables in the spherical roller bearing section.



Unit of Measure: Imperial Metric Both

Specifications  · Basic Load Ratings  · Factors

Specifications

Bearing Number
22336

Diameter S-2
7 13/16 in

Diameter S-3
6.8750 in

A
8.875 in

B
30.5 in

C
10.75 in

D
3-1/4 in

E Max.
26.375 in

E Min.
24.125 in

F
6.875 in

H1
17.9375 in

Oil Level K
3.375 in

L2
11.375 in

Y
3.7344 in

No. of Base Bolts Required
4

Size of Base Bolts Required
1 1/2

Bolt Hole Length
2.625 in

Bolt Hole Width
1.5 in

Locknut
AN36

Lockwasher
W36

Housing Only3
SDAF336

Stabilizing Ring 1 Req'd4
SR-0-36

Triple Seal 2 Req’d at S-2
LOR234

Triple Seal 2 Req’d at S-3
LOR223

Full Timken Part Number
SDAF22336
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size.
4 Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.


Basic Load Ratings

C0 - Static Radial Rating
584000 lbf
2600000 N

C1(2) - Dynamic Radial Rating (Two-Rows)
491000 lbf
2190000 N


Factors

e - ISO Factor1
0.32

Y0 - ISO Factor2
2.08

Y1 - ISO Factor3
2.13

Y2 - ISO Factor4
3.17

Reference Thermal Speed Rating (Grease)
1200 rpm

Reference Thermal Speed Rating (Oil)5
1300 rpm

Cg - Geometry Factor6
0.0988
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. See engineering
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
5 See thermal speed ratings in the engineering section.
6 Geometry constant for Lubrication Life Adjustment Factor a3l.




 NEW PRODUCT OFFERING 


TimkenWirelessSensor
Timken® Wireless Sensor and Monitoring Solution

timken-2TS-DM-24-OD-pin-cage-top-angle-view
Tapered Roller Bearings - 2TS (Matched Bearing Assembly)

Add To Cart Request Quote
<