Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Inch Tapered Bore Mounting Pillow Block SDAF225 and SDAF226 Series
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Mounted SAF Split-Block Spherical Roller Bearings > Inch Tapered Bore Mounting Pillow Block SDAF225 and SDAF226 Series > Part Number SDAF 22524 4-1/8  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number SDAF 22524 4-1/8, Inch Tapered Bore Mounting Pillow Block SDAF225 and SDAF226 Series


  • Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and lockwasher, stabilizing ring and triple ring seals.
  • To order pillow block housing only, use the number listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
  • Assembly and pillow blocks as described on this page constitute fixed units.
  • To order float units, specify part number plus suffix "Float" or "FL".
  • If one end closed assembly is required, specify “CL” in assembly number when ordering.
  • Assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 22515).

When ordering non-standard pillow block assemblies specify the shaft size.



Unit of Measure: Imperial Metric Both

Specifications  · Basic Load Ratings  · Factors

Specifications

Bearing Number
22224K

Diameter S-1
4.1250 in

A
5.5 in

B
16.5 in

C
6.875 in

D
2.25 in

E Max.
14.5 in

E Min.
13.25 in

F
4.125 in

H1
10.5 in

Oil Level K
1.9375 in

L2
7.375 in

Y
2.0938 in

No. of Base Bolts Required
4

Size of Base Bolts Required
7/8

Bolt Hole Length
1.5 in

Bolt Hole Width
0.875 in

Adapter Assembly Number3
SNW-24 x 4-1/8

Housing Only4
SDAF524 x 4-1/8

Stabilizing Ring 1 Req'd5
SR-24-20

Triple Seal Req'd
LOR 112

Full Timken Part Number
SDAF225244-1/8
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 Includes sleeve, locknut and lockwasher. Add shaft size to order.
4 "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size.
5 Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.


Basic Load Ratings

C0 - Static Radial Rating
174000 lbf
772000 N

C1(2) - Dynamic Radial Rating (Two-Rows)
145000 lbf
647000 N


Factors

e - ISO Factor1
0.25

Y0 - ISO Factor2
2.64

Y1 - ISO Factor3
2.7

Y2 - ISO Factor4
4.02

Reference Thermal Speed Rating (Grease)
2600 rpm

Reference Thermal Speed Rating (Oil)5
3200 rpm

Cg - Geometry Factor6
0.0778
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. See engineering
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
5 See thermal speed ratings in the engineering section.
6 Geometry constant for Lubrication Life Adjustment Factor a3l.




 NEW PRODUCT OFFERING 


TimkenWirelessSensor
Timken® Wireless Sensor and Monitoring Solution

timken-2TS-DM-24-OD-pin-cage-top-angle-view
Tapered Roller Bearings - 2TS (Matched Bearing Assembly)

Add To Cart Request Quote
<