Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Inch Tapered Bore Mounting Pillow Block SDAF225 and SDAF226 Series
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Mounted SAF Split-Block Spherical Roller Bearings > Inch Tapered Bore Mounting Pillow Block SDAF225 and SDAF226 Series > Part Number SDAF 22622  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number SDAF 22622, Inch Tapered Bore Mounting Pillow Block SDAF225 and SDAF226 Series


  • Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and lockwasher, stabilizing ring and triple ring seals.
  • To order pillow block housing only, use the number listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
  • Assembly and pillow blocks as described on this page constitute fixed units.
  • To order float units, specify part number plus suffix "Float" or "FL".
  • If one end closed assembly is required, specify “CL” in assembly number when ordering.
  • Assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 22515).

When ordering non-standard pillow block assemblies specify the shaft size.



Unit of Measure: Imperial Metric Both

Specifications  · Basic Load Ratings  · Factors

Specifications

Bearing Number
22322K

Diameter S-1
3 15/16 in

A
6 in

B
18.375 in

C
7.5 in

D
2.375 in

E Max.
16 in

E Min.
14.625 in

F
4-1/2 in

H1
11.875 in

Oil Level K
2.5 in

L2
8 in

Y
2.4844 in

No. of Base Bolts Required
4

Size of Base Bolts Required
1

Bolt Hole Length
1.6875 in

Bolt Hole Width
1 in

Adapter Assembly Number3
SNW-122 x 3-15/16

Housing Only4
SDAF622

Stabilizing Ring 1 Req'd5
SR-0-22

Triple Seal Req'd
LOR 93

Full Timken Part Number
SDAF22622
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 Includes sleeve, locknut and lockwasher. Add shaft size to order.
4 "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size.
5 Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.


Basic Load Ratings

C0 - Static Radial Rating
236000 lbf
1050000 N

C1(2) - Dynamic Radial Rating (Two-Rows)
213000 lbf
949000 N


Factors

e - ISO Factor1
0.32

Y0 - ISO Factor2
2.04

Y1 - ISO Factor3
2.08

Y2 - ISO Factor4
3.1

Reference Thermal Speed Rating (Grease)
2100 rpm

Reference Thermal Speed Rating (Oil)5
2500 rpm

Cg - Geometry Factor6
0.0792
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. See engineering
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
5 See thermal speed ratings in the engineering section.
6 Geometry constant for Lubrication Life Adjustment Factor a3l.




 NEW PRODUCT OFFERING 


TimkenWirelessSensor
Timken® Wireless Sensor and Monitoring Solution

timken-2TS-DM-24-OD-pin-cage-top-angle-view
Tapered Roller Bearings - 2TS (Matched Bearing Assembly)

Add To Cart Request Quote
<