All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Mounted SAF Split-Block Spherical Roller Bearings > Inch Tapered Bore Mounting Pillow Block SDAF225 and SDAF226 Series > Part Number SDAF 22640  

Part Number SDAF 22640, Inch Tapered Bore Mounting Pillow Block SDAF225 and SDAF226 Series

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • Each assembly includes the housing cap and base, cap bolts, bearing, bearing adapter, locknut and lockwasher, stabilizing ring and triple ring seals.
  • To order pillow block housing only, use the number listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
  • Assembly and pillow blocks as described on this page constitute fixed units.
  • To order float units, specify part number plus suffix "Float" or "FL".
  • If one end closed assembly is required, specify “CL” in assembly number when ordering.
  • Assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 22515).

When ordering non-standard pillow block assemblies specify the shaft size.




Specifications  · Basic Load Ratings  · Factors

Specifications

Bearing Number
22340K

Diameter S-1
7 3/16 in

A
9.875 in

B
33.5 in

C
11.75 in

D
3-1/2 in

E Max.
29.25 in

E Min.
26.625 in

F
7.625 in

H1
19.9375 in

Oil Level K
3.75 in

L2
12.25 in

Y
4.0781 in

No. of Base Bolts Required
4

Size of Base Bolts Required
1 5/8

Bolt Hole Length
2.9375 in

Bolt Hole Width
1.625 in

Adapter Assembly Number3
SNW-140 x 7-3/16

Housing Only4
SDAF640

Stabilizing Ring 1 Req'd5
SR-0-40

Triple Seal Req'd
LOR 228

Full Timken Part Number
SDAF22640
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 Includes sleeve, locknut and lockwasher. Add shaft size to order.
4 "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size.
5 Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.


Basic Load Ratings

C0 - Static Radial Rating
658000 lbf
2930000 N

C1(2) - Dynamic Radial Rating (Two-Rows)
556000 lbf
2470000 N


Factors

e - ISO Factor1
0.33

Y0 - ISO Factor2
1.98

Y1 - ISO Factor3
2.02

Y2 - ISO Factor4
3.01

Reference Thermal Speed Rating (Grease)
1000 rpm

Reference Thermal Speed Rating (Oil)5
1200 rpm

Cg - Geometry Factor6
0.1034
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. See engineering
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
5 See thermal speed ratings in the engineering section.
6 Geometry constant for Lubrication Life Adjustment Factor a3l.