Montage of Timken Bearing Products 
Search Catalog
        
 All Product Types    Inch Straight Bore Mounting Pillow Block SDAF231 and SDAF232 Series
View Cart View RFQs Express Ordering  | Shipping 
 | Tax 
 | Terms
 Shopping Cart 0 Items
 Request for Quote 0 Items
All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Mounted SAF Split-Block Spherical Roller Bearings > Inch Straight Bore Mounting Pillow Block SDAF231 and SDAF232 Series > Part Number SDAF 23192  
Download PDF Download PDF     Printable Page     Email Email This Page     Save To Favorites Save To Favorites
Add To Cart Request Quote

Part Number SDAF 23192, Inch Straight Bore Mounting Pillow Block SDAF231 and SDAF232 Series


  • Each assembly includes the housing cap and base, cap bolts, bearing, locknut and washer, stabilizing ring and triple ring seals.
  • To order pillow block housing only, use the numbers listed in the "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals, and stabilizing ring.
  • Assembly and pillow blocks described on this page constitute fixed units.
  • To order float units, specify part number plus suffix "Float" or "FL".
  • If one end closed assembly is required, specify “CL” in assembly number when ordering.
  • All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SDAFS 23152).
  • For fixed applications, both stabilizing rings must be used. Do not use stabilizing rings for “Float” mounting.



Unit of Measure: Imperial Metric Both

Specifications  · Basic Load Ratings  · Factors

Specifications

Bearing Number
23192

Diameter S-2
20 in

Diameter S-3
17.7500 in

A
18 in

B
54.25 in

C
21.625 in

D
5.75 in

E Max.
48.875 in

E Min.
47.125 in

F
15 in

H1
35.75 in

Oil Level K
6 in

L2
22.75 in

No. of Base Bolts Required
4

Size of Base Bolts Required
2 1/2

Bolt Hole Length
3.375 in

Bolt Hole Width
2.5 in

Locknut
NO92

Lockplate
P92

Housing Only3
SDAF3192

Stabilizing Ring 1 Req'd4
A8990

Triple Seal 2 Req’d at S-2
ER808-1

Triple Seal 2 Req’d at S-3
ER906-1

Full Timken Part Number
SDAF23192
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size.
4 Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.


Basic Load Ratings

C0 - Static Radial Rating
2500000 lbf
11100000 N

C1(2) - Dynamic Radial Rating (Two-Rows)
1460000 lbf
6500000 N


Factors

e - ISO Factor1
0.3

Y0 - ISO Factor2
2.19

Y1 - ISO Factor3
2.24

Y2 - ISO Factor4
3.33

Reference Thermal Speed Rating (Grease)
390 rpm

Reference Thermal Speed Rating (Oil)5
430 rpm

Cg - Geometry Factor6
0.1009
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. See engineering
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
5 See thermal speed ratings in the engineering section.
6 Geometry constant for Lubrication Life Adjustment Factor a3l.




 NEW PRODUCT OFFERING 


TimkenWirelessSensor
Timken® Wireless Sensor and Monitoring Solution

timken-2TS-DM-24-OD-pin-cage-top-angle-view
Tapered Roller Bearings - 2TS (Matched Bearing Assembly)

Add To Cart Request Quote
<