All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Mounted SAF Split-Block Spherical Roller Bearings > Inch Straight Bore Mounting Pillow Block SAF222 and SAF223 Series > Part Number SAF 22330  

Part Number SAF 22330, Inch Straight Bore Mounting Pillow Block SAF222 and SAF223 Series

    Download PDF Download PDF   
    border="0" Printable Page  
    Email Email This Page  
    Save To Favorites Save To Favorites
  

  • Each assembly includes the housing cap and base, cap bolts, bearing, locknut and lockwasher, stabilizing ring and triple ring seals.
  • To order pillow block housing only, use the numbers listed in "Housing Only" column. These units include: cap, base, cap bolts, triple ring seals and stabilizing ring.
  • Assembly and pillow blocks described on this page constitute fixed units.
  • To order float units, specify part number plus suffix "Float" or "FL".
  • If one end closed assembly is required, specify “CL” in assembly number when ordering.
  • All assemblies shown are furnished in cast iron. If cast steel is desired, add the letter "S" to the alpha prefix (e.g., SAFS 22217).

Speed ratings are found in dimension tables in the spherical roller bearing section.




Specifications  · Basic Load Ratings  · Factors

Specifications

Bearing Number
22330

Diameter S-2
6 5/8 in

Diameter S-3
5.7500 in

A
7-1/2 in

B
26.75 in

C
7-1/8 in

D
3 in

E Max.
23.625 in

E Min.
20.875 in

F
4-5/8 in

H1
15.5 in

Oil Level K
2.875 in

L2
9.688 in

Y
3.2656 in

No. of Base Bolts Required
4

Size of Base Bolts Required
1

Bolt Hole Length
2.375 in

Bolt Hole Width
1 in

Locknut
AN30

Lockwasher
W30

Housing Only3
SAF330

Stabilizing Ring 1 Req'd4
SR-36-30

Triple Seal 2 Req’d at S-2
LOR151

Triple Seal 2 Req’d at S-3
LOR134

Seal Type
Triple Ring Seal

Full Timken Part Number
SAF22330
1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
3 "Housing Only" includes: cap, base, cap bolts, triple ring seals and stabilizing ring as required. When ordering non-standard housing only specify the shaft size.
4 Stabilizing ring is used for fixed (FX) block; do not use for float (FL) mounting.


Basic Load Ratings

C0 - Static Radial Rating
424000 lbf
1890000 N

C1(2) - Dynamic Radial Rating (Two-Rows)
365000 lbf
1620000 N


Factors

e - ISO Factor1
0.33

Y0 - ISO Factor2
2.03

Y1 - ISO Factor3
2.08

Y2 - ISO Factor4
3.09

Reference Thermal Speed Rating (Grease)
1500 rpm

Reference Thermal Speed Rating (Oil)5
1600 rpm

Cg - Geometry Factor6
0.0884
1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
2 These factors apply for both inch and metric calculations. See engineering
3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
5 See thermal speed ratings in the engineering section.
6 Geometry constant for Lubrication Life Adjustment Factor a3l.