Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Timken SNT Plummer Blocks feature durable cast-iron housing and robust sealing options to keep lubrication in and contamination out. Add in Timken® high-performance spherical roller bearings for a metric split block housed unit that delivers performance in the toughest environments. Timken SNT Plummer Blocks are available in two- and four-bolt mounting configurations. The SNT line features 200, 300, 500 and 600 series housings; 3000 and 3100 series are available for larger sizes. Shaft size range: 20 mm to 380 mm, cast steel and ductile iron housings available for severe duty applications.
Unit of Measure

Types of Components

Housing

 N/A SNTD 3076GL

Bearing

 N/A 23076

Locating Rings (width x OD)

 N/A FLOAT HOUSING

Seal Type

 N/A Labyrinth

Seal

 N/A LO84
End Cover1 N/A EC84

Housing

Material 

 N/A Ductile Iron

Housing Mass

 N/A 458.9 Kg

Bolt Qty

 N/A 4

Bearing

Cage Type

 N/A YMB

C1 Dynamic Load Rating

 N/A 3070000

C0 Static Load Rating

 N/A 5110000

Max Oil Speed

 N/A 830

Max Grease Speed

 N/A 710

Other Dimensions

Shaft Diameter da

 N/A 380 mm

Shaft Diameter db

 N/A 400 mm

A

 N/A 400 mm

A1

 N/A 360 mm

A2

 N/A 410.5 mm

C

 N/A 24 mm

G

 N/A M36

H

 N/A 675 mm

H1

 N/A 340 mm

H2

 N/A 120 mm

J

 N/A 810 mm

J1

 N/A 220 mm

L

 N/A 950 mm

N

 N/A 42 mm

N1

 N/A 50 mm

Key Dimensions

Alternate Part Name

 N/A SNTD 3076GL - 23076 - LO84

Superseded Part

 N/A SNT 3076GL - 23076 - LO84
  • 1 Two seals are required for a thru shaft application. One end cover can be used if application is not a thru shaft design. In this case, only one seal is required.