Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Timken SNT Plummer Blocks feature durable cast-iron housing and robust sealing options to keep lubrication in and contamination out. Add in Timken® high-performance spherical roller bearings for a metric split block housed unit that delivers performance in the toughest environments. Timken SNT Plummer Blocks are available in two- and four-bolt mounting configurations. The SNT line features 200, 300, 500 and 600 series housings; 3000 and 3100 series are available for larger sizes. Shaft size range: 20 mm to 380 mm, cast steel and ductile iron housings available for severe duty applications.
Unit of Measure

Types of Components

Housing

 N/A SNTD 3096GL

Bearing

 N/A 23096

Locating Rings (width x OD)

 N/A FLOAT HOUSING

Seal Type

 N/A Taconite

Seal

 N/A TA30/530/510
End Cover1 N/A EC30/530

Housing

Material 

 N/A Ductile Iron

Housing Mass

 N/A 699.8 Kg

Bolt Qty

 N/A 4

Bearing

C1 Dynamic Load Rating

 N/A 4170000

C0 Static Load Rating

 N/A 7980000

Max Oil Speed

 N/A 600

Max Grease Speed

 N/A 530

Other Dimensions

Shaft Diameter da

 N/A 480 mm

Shaft Diameter db

 N/A 510 mm

A

 N/A 460 mm

A1

 N/A 420 mm

A3

 N/A 555 mm

C

 N/A 42 mm

G

 N/A M42

H

 N/A 810 mm

H1

 N/A 410 mm

H2

 N/A 130 mm

J

 N/A 1000 mm

J1

 N/A 260 mm

L

 N/A 1170 mm

N

 N/A 48 mm

N1

 N/A 60 mm

Key Dimensions

Alternate Part Name

 N/A SNTD 3096GL - 23096 - TA30/530/510

Superseded Part

 N/A SNT 3096GL - 23096 - TA30/530/510
  • 1 Two seals are required for a thru shaft application. One end cover can be used if application is not a thru shaft design. In this case, only one seal is required.