Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Timken SNT Plummer Blocks feature durable cast-iron housing and robust sealing options to keep lubrication in and contamination out. Add in Timken® high-performance spherical roller bearings for a metric split block housed unit that delivers performance in the toughest environments. Timken SNT Plummer Blocks are available in two- and four-bolt mounting configurations. The SNT line features 200, 300, 500 and 600 series housings; 3000 and 3100 series are available for larger sizes. Shaft size range: 20 mm to 380 mm, cast steel and ductile iron housings available for severe duty applications.
Unit of Measure

Types of Components

Housing

 N/A SNTD 3056

Bearing

 N/A 22340K

Locating Rings (width x OD)

 N/A SR420X14

Seal Type

 N/A Labyrinth

Seal

 N/A LO56/180
Adapter Sleeve1 N/A H2340

Locknut

 N/A KM40

Lockwasher

 N/A MB40
End Cover2 N/A EC56

Housing

Material 

 N/A Ductile Iron

Housing Mass

 N/A 244.9 Kg

Bolt Qty

 N/A 4

Bearing

Cage Type

 N/A EJ

C1 Dynamic Load Rating

 N/A 2470000

C0 Static Load Rating

 N/A 2930000

Max Oil Speed

 N/A 1200

Max Grease Speed

 N/A 1000

Other Dimensions

Shaft Diameter d

 N/A 180 mm

A

 N/A 320 mm

A1

 N/A 280 mm

A2

 N/A 332.5 mm

C

 N/A 13 mm

G

 N/A 36

H

 N/A 516 mm

H1

 N/A 260 mm

H2

 N/A 100 mm

J

 N/A 650 mm

J1

 N/A 160 mm

L

 N/A 770 mm

N

 N/A 42 mm

N1

 N/A 50 mm
  • 1 Purchase the Adapter Sleeve separately
  • 2 Two seals are required for a thru shaft application. One end cover can be used if application is not a thru shaft design. In this case, only one seal is required.