Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Timken SNT Plummer Blocks feature durable cast-iron housing and robust sealing options to keep lubrication in and contamination out. Add in Timken® high-performance spherical roller bearings for a metric split block housed unit that delivers performance in the toughest environments. Timken SNT Plummer Blocks are available in two- and four-bolt mounting configurations. The SNT line features 200, 300, 500 and 600 series housings; 3000 and 3100 series are available for larger sizes. Shaft size range: 20 mm to 380 mm, cast steel and ductile iron housings available for severe duty applications.
Unit of Measure

Types of Components

Housing

 N/A SNTD 3148

Bearing

 N/A 22338K

Locating Rings (width x OD)

 N/A SR400X8

Seal Type

 N/A Labyrinth

Seal

 N/A LO48/170
Adapter Sleeve1 N/A H2338

Locknut

 N/A KM38

Lockwasher

 N/A MB38
End Cover2 N/A EC48

Housing

Material 

 N/A Ductile Iron

Housing Mass

 N/A 193 Kg

Bolt Qty

 N/A 4

Bearing

Cage Type

 N/A EJ

C1 Dynamic Load Rating

 N/A 2380000

C0 Static Load Rating

 N/A 2830000

Max Oil Speed

 N/A 1200

Max Grease Speed

 N/A 1100

Other Dimensions

Shaft Diameter d

 N/A 170 mm

A

 N/A 310 mm

A1

 N/A 260 mm

A2

 N/A 318.5 mm

C

 N/A 12 mm

G

 N/A 30

H

 N/A 474 mm

H1

 N/A 240 mm

H2

 N/A 95 mm

J

 N/A 600 mm

J1

 N/A 150 mm

L

 N/A 700 mm

N

 N/A 35 mm

N1

 N/A 42 mm
  • 1 Purchase the Adapter Sleeve separately
  • 2 Two seals are required for a thru shaft application. One end cover can be used if application is not a thru shaft design. In this case, only one seal is required.