Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation.

In addition to standard single-row deep groove bearings, Timken offers special designs, including a maximum capacity series and an extra large (XLS) radial series bearing.

Size range: 3 mm - 600 mm (0.12 in. - 23.62 in.) bore
Unit of Measure

Specifications

Design Units

 N/A Metric

Rows per Set

 N/A Single

d - Bore

 N/A 40 mm

Ball Type

 N/A STEEL

Cage Type

 N/A CR - Phenolic Inner Land Riding Cage

Precision Class

 N/A ISO P4S (ABEC 7/9)

Dimensions

D - Outer Diameter

 N/A 2.4409 in62 mm

Bearing Width

 N/A 0.4724 in12 mm

Basic Load Ratings

Ce - Dynamic Radial Rating (per row)1 N/A 3030 lbf13500 N

C0 - Static Radial Rating (per row)

 N/A 2000 lbf8900 N

C1 ISO - Dynamic Radial Rating (per row)

 N/A 2760 lbf12300 N

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius2 N/A 0.020 in0.60 mm
r - Outer Ring "To Clear" Radius3 N/A 0.02 in0.6 mm

da - Inner Ring Backing Diameter

 N/A 1.760 in44.800 mm

Da - Outer Ring Backing Diameter

 N/A 1.7700 in45.00 mm
  • 1 Based on 106 revolutions of calculated fatigue life.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 Maximum shaft fillet radius that bearing corners will clear.