Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
Request Information
Radial ball bearings consist of an inner and outer ring with a cage containing a complement of precision balls. The standard Conrad-type bearing has a deep-groove construction capable of handling radial and axial loads from either direction in versatile designs that permit relatively high-speed operation.

In addition to standard single-row deep groove bearings, Timken offers special designs, including a maximum capacity series and an extra large (XLS) radial series bearing.

Size range: 3 mm - 600 mm (0.12 in. - 23.62 in.) bore
Unit of Measure

Key Dimensions

Design Units

 N/A Metric

Rows per Set

 N/A Single

Bore (d)

 N/A 17 mm

O.D. (D)

 N/A 1.5748 in40 mm
Dynamic Radial Load Rating - 1M Revs (C1)1 N/A 2380 lbf10600 N

Ball Type

 N/A Ceramic

Cage Type

 N/A CR - Phenolic Inner Land Riding Cage

Precision Class

 N/A ISO P4S (ABEC 7/9)

Other Dimensions

Bearing Width

 N/A 0.4724 in12 mm
Max Shaft Fillet Radius2 N/A 0.024 in0.6 mm

Shaft Backing Shoulder Diameter

 N/A 0.850 in21.5 mm

Housing Backing Shoulder Diameter

 N/A 1.410 in35.7 mm

Ratings

Static Radial Load Rating (C0)

 N/A 950 lbf4230 N

Limiting Speed - Grease

 N/A 46200 rpm

Limiting Speed - Oil

 N/A 92400 rpm

C1 ISO - Dynamic Radial Rating (per row)

 N/A 2160 lbf9640 N

Abutment and Fillet Dimensions

r - Outer Ring "To Clear" Radius3 N/A 0.024 in0.6 mm
  • 1 Based on 106 revolutions of calculated fatigue life.
  • 2 Maximum housing fillet radius that bearing corners will clear.
  • 3 Maximum shaft fillet radius that bearing corners will clear.