COMPANY HEADER
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Terms
Request Information

RunRight® RT F tensioners are designed for front mounting applications where access to back side or rear mounting surfaces is not possible. A single threaded hole is required to mount these tensioners. These tensioners include a special mounting screw and spacer bushing. They are manufactured with powder metal or cast iron housings, cast iron arms and inner square, come with the standard Tensys™ 10 rubber inserts, and can be used for applications operating within a -40° to 180°F (-40° to 80°C) temperature range.

Unit of Measure

Specifications

Description 

 N/A RT-F-50-TENSNR MM

Type

 N/A Chain/Belt Tensioner

Element Material

 N/A Natural Rubber

Style

 N/A Elastomeric

Color

 N/A Black

Dimensional Data

Tensioner

 N/A RT F50-M

Mounting Bolt Size

 N/A M20

Outside Diameter (Dim D)

 N/A 130 mm5.120 in

Overall Length (Dim E)

 N/A 210 mm8.270 in

Dimension T

 N/A 20.5 mm

Dimension L

 N/A 290 mm11.42 in

Dimension J-1

 N/A 250 mm9.84 in

Dimension J-2

 N/A 200 mm7.87 in

Dimension M

 N/A 23 mm

Dimension R

 N/A 27 mm

Dimension G

 N/A 20 mm0.79 in

Dimension O

 N/A 20 mm0.79 in

Dimension P

 N/A 17 mm0.67 in

Dimension K

 N/A 80 mm3.15 in

Performance Data

Normal Temperature Range

 N/A -40 to 180 ºC-40 to 80 ºF

Mounting Bolt Torque

 N/A 750 N·m6638 in·lb

Force at 20° Angle of Pretension (Normal Force Level) (Dimension F)

 N/A 2150 N483.3 lb

Distance at 20° Angle of Pretension (Normal Force Level) (Dimension S)

 N/A 86 mm3.4 in

Notes

Notes 

 N/A
  • The recommended angle of pretension is 20°. This provides the tensioner a maximum capability to absorb vibrations and shock loads, while also maintaining a range of motion to address the system’s belt or chain stretch.
  • Mounting accessories into the “Hard” Position results in approximately 25% higher tensioning force over the “normal” position.
  • Metric standard tensioner units all come with a mounting screw, but do not come with the sprocket idler bolt (which is supplied instead with RunRight metric idler sprockets).