The J Type flanges in sizes 3J and 4J are made from die cast of high strength zinc
alloy (tensile strength of 41,000 psi) and are furnished bore-to-size.
Size 5J is provided in either zinc alloy or cast iron depending on the bore size.
Size 6J is made from cast iron.
J flanges are compatible with EPDM or Neoprene sleeves.
Each flange has a keyway and two set screws (one set screw over the key and
one at 90° to the keyway).
The J Type coupling consists of two flanges and one sleeve.
N/ALovejoy: CAD Models are accurate envelope dimensions only. Features such as bore size and keyway are not rendered or are only representative. Contact Lovejoy Technical Support or refer to product catalogs for details.
Notes
N/A
Spacing between shafts should be greater than 1/8 inch and less than OAL minus the sum of the two bore dimensions.
