Batch CAD Cart (0)
▾
- Specifically designed for the pump industry, this coupling accommodates industry standard as well as special pump/motor separation
- This shaft separation facilitates easy pump repair of pump packing, bearings, and seals without disturbing pump or motor mounting and alignment
- The SC Type coupling consists of two flanges, a sleeve and two shaft hubs
- The center drop out section consists of two flanges and the flexible sleeve
- The flange is bolted to the shaft hub with four hex head cap screws
- The center drop out section can be removed by removing the hex head cap screws
- Flats on each hub provides a convenient grip for a wrench in order to facilitate loosening of the screws and, if desired, turning of the pump/motor shafts
- Once the hub is removed from the pump shaft, maintenance on the pump can be done without disturbing equipment alignment
Unit of Measure
Specifications
Description |
N/A 8SC44-SPCR FLNG |
Flange # |
N/A 8SC44 |
SC Hub # |
N/A 8SCH |
Type |
N/A Coupling Flange |
Material |
N/A Cast Iron |
Color |
N/A Gray |
Bore Type |
N/A Spacer Flange/No Bore |
Coupling Type |
N/A S-Flex |
Weight |
N/A 4.30 lb |
Dimensional Data
Keyway Size (W x D) |
N/A No Keyway |
Outside Diameter |
N/A 5.450 in138.43 mm |
Dimension FL |
N/A 0.910 in23.11 mm |
Dimension HD |
N/A 0.720 in18.29 mm |
Dimension L |
N/A 2.060 in52.32 mm |
Dimension P |
N/A 0.720 in18.29 mm |
For Required Shaft Separation |
N/A 4.375 in |
Cubic inches |
N/A 61.18715 in³ |
