3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

  • Model TF flanges are made from the same high-strength cast iron as the S flanges, but are designed to accommodate the international standard Taper Lock bushing for easy installation and removal
  • TF Type flanges allow for mounting the bushing on the front (hub) side of the flange
  • TF flanges are available in sizes 6 through 16 and can be used with JE, JN, JES, JNS, E, N, H, and HS sleeve types.
Unit of Measure




Coupling Size



N/A Coupling Flange


N/A Cast Iron


N/A 17.00 lb


N/A Gray

Bore Type

N/A Bored to Accept 1615/1610 Taper Lock Bushing

Mount Type

N/A Front

Bushing Required

N/A 2012

Coupling Type

N/A S-Flex

UNC Flange UPC Number

N/A 62275

Dimensional Data

Keyway Size (W x D)

N/A No Keyway

Hub Diameter

N/A 4.130 in104.90 mm

Dimension L

N/A 2.280 in57.91 mm

Outside Diameter

N/A 6.350 in161.29 mm

Overall Length

N/A 6.000 in152.40 mm

Max. Bore (Dimensions ID1/ID2)

N/A 2.000 in50.00 mm

Dimension FL

N/A 1.030 in26.16 mm

Dimension G

N/A 1.440 in36.58 mm

Dimension P

N/A 1.250 in31.75 mm

Dimension R

N/A 1.750 in44.45 mm

Bushing Screw Size

N/A 7/16-14

Cubic inches

N/A 91.93530 in³

Performance Data

Nominal Torque (with EPDM Sleeve)

N/A 1800 in·lb

Max. Speed

N/A 3750.00 rpm

Torsional Stiffness

N/A 6875.00 in·lb/rad

Rated HP at 100 rpm for 1.0 Service Factor

N/A 2.90 hp

Rated HP at 1,200 rpm

N/A 34.00 hp

Rated HP at 1,800 rpm

N/A 51.00 hp

Rated HP at 3,600 rpm

N/A 103.00 hp



  • Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.
  • All above data refers to both standard UNC and British Standard Whitworth B.S.W. threads. Flanges are not supplied with screws.
  • Use of a 1210 or 1610 bushing reduces the reserve factor between bushing torque rating and that of the coupling.
  • Taper-Lock® is a registered trademark of Reliance Electric Industrial Company in the United States and Canada. It is a registered trademark of JH Fenner and Co. in the United Kingdom.
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.