COMPANY HEADER
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Terms
Request Information
  • Model TF flanges are made from the same high-strength cast iron as the S flanges, but are designed to accommodate the international standard Taper Lock bushing for easy installation and removal
  • TF Type flanges allow for mounting the bushing on the front (hub) side of the flange
  • TF flanges are available in sizes 6 through 16 and can be used with JE, JN, JES, JNS, E, N, H, and HS sleeve types.
Unit of Measure

Specifications

Description 

 N/A 9TF-FLNG-TAPER-BSW-THREAD

Coupling Size

 N/A 9TF

Type

 N/A Coupling Flange

Material

 N/A Cast Iron

Weight

 N/A 17.00 lb

Color

 N/A Gray

Bore Type

 N/A Bored to Accept 1615/1610 Taper Lock Bushing

Mount Type

 N/A Front

Bushing Required

 N/A 2012

Coupling Type

 N/A S-Flex

UNC Flange UPC Number

 N/A 62275

Dimensional Data

Keyway Size (W x D)

 N/A No Keyway

Hub Diameter

 N/A 4.130 in104.90 mm

Dimension L

 N/A 2.280 in57.91 mm

Outside Diameter

 N/A 6.350 in161.29 mm

Overall Length

 N/A 6.000 in152.40 mm

Max. Bore (Dimensions ID1/ID2)

 N/A 2.000 in50.00 mm

Dimension FL

 N/A 1.030 in26.16 mm

Dimension G

 N/A 1.440 in36.58 mm

Dimension P

 N/A 1.250 in31.75 mm

Dimension R

 N/A 1.750 in44.45 mm

Bushing Screw Size

 N/A 7/16-14

Cubic inches

 N/A 91.93530 in³

Performance Data

Nominal Torque (with EPDM Sleeve)

 N/A 1800 in·lb

Max. Speed

 N/A 3750.00 rpm

Torsional Stiffness

 N/A 6875.00 in·lb/rad

Rated HP at 100 rpm for 1.0 Service Factor

 N/A 2.90 hp

Rated HP at 1,200 rpm

 N/A 34.00 hp

Rated HP at 1,800 rpm

 N/A 51.00 hp

Rated HP at 3,600 rpm

 N/A 103.00 hp

Notes

Notes 

 N/A
  • Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.
  • All above data refers to both standard UNC and British Standard Whitworth B.S.W. threads. Flanges are not supplied with screws.
  • Use of a 1210 or 1610 bushing reduces the reserve factor between bushing torque rating and that of the coupling.
  • Taper-Lock® is a registered trademark of Reliance Electric Industrial Company in the United States and Canada. It is a registered trademark of JH Fenner and Co. in the United Kingdom.