Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information
  • Model TF flanges are made from the same high-strength cast iron as the S flanges, but are designed to accommodate the international standard Taper Lock bushing for easy installation and removal
  • TF Type flanges allow for mounting the bushing on the front (hub) side of the flange
  • TF flanges are available in sizes 6 through 16 and can be used with JE, JN, JES, JNS, E, N, H, and HS sleeve types.
Unit of Measure

Specifications

Description 

 N/A 13TF-FLNG-TAPER-BSW-THREAD

Coupling Size

 N/A 13TF

Type

 N/A Coupling Flange

Material

 N/A Cast Iron

Weight

 N/A 17.00 lb

Color

 N/A Gray

Bore Type

 N/A Bored to Accept 3030 Taper Lock bushing

Mount Type

 N/A Front

Bushing Required

 N/A 3030

Coupling Type

 N/A S-Flex

UNC Flange UPC Number

 N/A 62294

Dimensional Data

Keyway Size (W x D)

 N/A No Keyway

Hub Diameter

 N/A 6.750 in171.45 mm

Dimension L

 N/A 4.380 in111.25 mm

Outside Diameter

 N/A 11.750 in298.45 mm

Overall Length

 N/A 9.250 in234.95 mm

Max. Bore (Dimensions ID1/ID2)

 N/A 3.000 in76.00 mm

Dimension FL

 N/A 1.970 in50.04 mm

Dimension G

 N/A 2.690 in68.33 mm

Dimension P

 N/A 1.310 in33.27 mm

Dimension R

 N/A 3.060 in77.72 mm

Bushing Screw Size

 N/A 5/8-11

Cubic inches

 N/A 604.71375 in³

Performance Data

Nominal Torque (with EPDM Sleeve)

 N/A 11350 in·lb

Max. Speed

 N/A 2400.00 rpm

Torsional Stiffness

 N/A 43350.00 in·lb/rad

Rated HP at 100 rpm for 1.0 Service Factor

 N/A 18.00 hp

Rated HP at 1,200 rpm

 N/A 216.00 hp

Rated HP at 1,800 rpm

 N/A 324.00 hp

Notes

Notes 

 N/A
  • Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.
  • All above data refers to both standard UNC and British Standard Whitworth B.S.W. threads. Flanges are not supplied with screws.
  • Use of a 1210 or 1610 bushing reduces the reserve factor between bushing torque rating and that of the coupling.
  • Taper-Lock® is a registered trademark of Reliance Electric Industrial Company in the United States and Canada. It is a registered trademark of JH Fenner and Co. in the United Kingdom.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.