Menu
Batch CAD Cart (0) ▾
  • Cart is empty
  1. Click Here for Batch Download
Request Information
  • TR flanges are similar to the TF style, but allow for the Taper Lock Bushing to be mounted and removed from the reverse or serration side of the flange
  • The limited torque ratings of the Taper Lock Bushings allow TR flanges to only be used with EPDM or Neoprene sleeves
  • Different bushing sizes are used, so they have different maximum bores than the TF flanges
  • Sizes 6 through 16 are available
Unit of Measure

Specifications

Description 

 N/A 6TR-FLNG-TAPER-BSW-THREAD

Coupling Size

 N/A 6TR

Type

 N/A Coupling Flange

Material

 N/A Cast Iron

Weight

 N/A 17.00 lb

Color

 N/A Gray

Bore Type

 N/A Bored to Accept 1008 Taper Lock Bushing

Mount Type

 N/A Rear

Bushing Required

 N/A 1008

Coupling Type

 N/A S-Flex

UNC Flange UPC Number

 N/A 62264

Dimensional Data

Keyway Size (W x D)

 N/A No Keyway

Hub Diameter

 N/A 2.810 in71.37 mm

Dimension L

 N/A 1.560 in39.62 mm

Outside Diameter

 N/A 4.000 in101.60 mm

Overall Length

 N/A 4.00 in101.60 mm

Max. Bore (Dimensions ID1/ID2)

 N/A 1.000 in25.00 mm

Dimension FL

 N/A 0.780 in19.81 mm

Dimension G

 N/A 0.88 in22.35 mm

Dimension P

 N/A 0.780 in19.81 mm

Dimension R

 N/A 1.090 in27.69 mm

Bushing Screw Size

 N/A 1/4-20

Cubic inches

 N/A 24.96000 in³

Performance Data

Nominal Torque (with EPDM Sleeve)

 N/A 450 in·lb

Max. Speed

 N/A 6000 rpm

Torsional Stiffness

 N/A 1718.00 in·lb/rad

Rated HP at 100 rpm

 N/A 0.70 hp

Rated HP at 1,200 rpm

 N/A 8.60 hp

Rated HP at 1,800 rpm

 N/A 12.90 hp

Rated HP at 3,600 rpm

 N/A 25.70 hp

Notes

Notes 

 N/A
  • Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.
  • All above data refers to both standard UNC and British Standard Whitworth B.S.W. threads. Flanges are not supplied with screws.
  • Use of a 1210 or 1610 bushing reduces the reserve factor between bushing torque rating and that of the coupling.
  • Taper-Lock® is a registered trademark of Reliance Electric Industrial Company in the United States and Canada. It is a registered trademark of JH Fenner and Co. in the United Kingdom.
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.