3D CAD and 2D Drawings

Find and download 3D CAD and 2D drawings for key Timken products.

Batch CAD Cart (0)
  • Cart is empty
  • TR flanges are similar to the TF style, but allow for the Taper Lock Bushing to be mounted and removed from the reverse or serration side of the flange
  • The limited torque ratings of the Taper Lock Bushings allow TR flanges to only be used with EPDM or Neoprene sleeves
  • Different bushing sizes are used, so they have different maximum bores than the TF flanges
  • Sizes 6 through 16 are available
Unit of Measure

Specifications

Description 

N/A 14TR FLNG TAPER-BSW THREAD

Coupling Size

N/A 14TR

Type

N/A Coupling Flange

Material

N/A Cast Iron

Weight

N/A 17.00 lb

Color

N/A Gray

Bore Type

N/A Bored to Accept 4040 Taper Lock bushing

Mount Type

N/A Rear

Bushing Required

N/A 3030

Coupling Type

N/A S-Flex

UNC Flange UPC Number

N/A 62296

Dimensional Data

Keyway Size (W x D)

N/A No Keyway

Hub Diameter

N/A 7.500 in190.50 mm

Dimension L

N/A 4.500 in114.30 mm

Outside Diameter

N/A 13.880 in352.55 mm

Overall Length

N/A 9.880 in250.95 mm

Max. Bore (Dimensions ID1/ID2)

N/A 3.000 in76.00 mm

Dimension FL

N/A 2.250 in57.15 mm

Dimension G

N/A 3.250 in82.55 mm

Dimension P

N/A 1.060 in26.92 mm

Dimension R

N/A 3.500 in88.90 mm

Bushing Screw Size

N/A 5/8-11

Cubic inches

N/A 866.94480 in³

Performance Data

Nominal Torque (with EPDM Sleeve)

N/A 18000 in·lb

Max. Speed

N/A 2200 rpm

Torsional Stiffness

N/A 68755.00 in·lb/rad

Rated HP at 100 rpm

N/A 28.60 hp

Rated HP at 1,200 rpm

N/A 343.00 hp

Rated HP at 1,800 rpm

N/A 514.00 hp

Notes

Notes 

N/A
  • Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.
  • All above data refers to both standard UNC and British Standard Whitworth B.S.W. threads. Flanges are not supplied with screws.
  • Use of a 1210 or 1610 bushing reduces the reserve factor between bushing torque rating and that of the coupling.
  • Taper-Lock® is a registered trademark of Reliance Electric Industrial Company in the United States and Canada. It is a registered trademark of JH Fenner and Co. in the United Kingdom.
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.