Request Information
  • TR flanges are similar to the TF style, but allow for the Taper Lock Bushing to be mounted and removed from the reverse or serration side of the flange
  • The limited torque ratings of the Taper Lock Bushings allow TR flanges to only be used with EPDM or Neoprene sleeves
  • Different bushing sizes are used, so they have different maximum bores than the TF flanges
  • Sizes 6 through 16 are available
Unit of Measure

Specifications

Description 

 N/A 14TR-FLNG-TAPER STD UNC THREAD

Coupling Size

 N/A 14TR

Type

 N/A Coupling Flange

Material

 N/A Cast Iron

Weight

 N/A 17.00 lb

Color

 N/A Gray

Bore Type

 N/A Bored to Accept 3030 Taper Lock bushing

Mount Type

 N/A Rear

Bushing Required

 N/A 3030

Coupling Type

 N/A S-Flex

UNC Flange UPC Number

 N/A 62298

Dimensional Data

Keyway Size (W x D)

 N/A No Keyway

Hub Diameter

 N/A 7.500 in190.50 mm

Dimension L

 N/A 4.500 in114.30 mm

Outside Diameter

 N/A 13.880 in352.55 mm

Overall Length

 N/A 9.880 in250.95 mm

Max. Bore (Dimensions ID1/ID2)

 N/A 3.000 in76.00 mm

Dimension FL

 N/A 2.250 in57.15 mm

Dimension G

 N/A 3.250 in82.55 mm

Dimension P

 N/A 1.060 in26.92 mm

Dimension R

 N/A 3.500 in88.90 mm

Bushing Screw Size

 N/A 5/8-11

Cubic inches

 N/A 866.94480 in³

Performance Data

Nominal Torque (with EPDM Sleeve)

 N/A 18000 in·lb

Max. Speed

 N/A 2200 rpm

Torsional Stiffness

 N/A 68755.00 in·lb/rad

Rated HP at 100 rpm

 N/A 28.60 hp

Rated HP at 1,200 rpm

 N/A 343.00 hp

Rated HP at 1,800 rpm

 N/A 514.00 hp

Notes

Notes 

 N/A
  • Be sure to determine if the bushing being used has either UNC threads (60°) or British Standard Whitworth B.S.W. threads (55°). In the U.S.A. the UNC type is predominant for both inch and metric bores. Outside of the U.S.A. it is most common to see B.S.W., especially on metric bores.
  • All above data refers to both standard UNC and British Standard Whitworth B.S.W. threads. Flanges are not supplied with screws.
  • Use of a 1210 or 1610 bushing reduces the reserve factor between bushing torque rating and that of the coupling.
  • Taper-Lock® is a registered trademark of Reliance Electric Industrial Company in the United States and Canada. It is a registered trademark of JH Fenner and Co. in the United Kingdom.