Batch CAD Cart (0)
  • Cart is empty
  • The chart below shows dimensions for locknuts and lockplates used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222,223 etc.).
Unit of Measure

Specifications

Bearing Bore

N/A 280 mm

Locknut

N/A N 056

Lockplate

N/A P 56

Threads

Major Diameter

N/A 279.5 mm11.004 in

Threads No. per Inch

N/A 6

Shaft

Relief Diameter A

N/A 273.38 mm10.763 in

Diameter S-3

N/A 273.05 mm10 3/4 in
L1 N/A 41.28 mm1.625 in
H2 N/A 11.13 mm0.438 in
S3 N/A 31.8 mm1.250 in

Locknut/Lockplate

C1

N/A 330.33 mm13.005 in

D

N/A 38.35 mm1.51 in

G

N/A 24.89 mm0.98 in
H14 N/A 9.78 mm0.385 in

R

N/A 228.6 mm9 in

F

N/A 47.23 mm1.859 in
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 4 Tolerance ±0.25 mm (±0.010 in)
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.