Batch CAD Cart (0)
  • Cart is empty
  • The chart below shows dimensions for locknuts and lockplates used in the mounting of straight bore bearings on shafts.
  • Other dimensions and tolerances related to shaft configurations are also shown.
  • Dimensions are presented according to bearing bore size and are applicable to bearings in the various series (e.g., 222,223 etc.).
Unit of Measure

Specifications

Bearing Bore

N/A 670 mm

Locknut

N/A N 670

Lockplate

N/A P 670

Threads

Major Diameter

N/A 670.03 mm26.379 in

Threads No. per Inch

N/A 4

Shaft

Relief Diameter A

N/A 660.81 mm26.016 in

Diameter S-3

N/A 657.2 mm25 7/8 in
L1 N/A 84.12 mm3.312 in
H2 N/A 12.7 mm0.5 in
S3 N/A 50.8 mm2 in

Locknut/Lockplate

C1

N/A 779.6 mm30.693 in

D

N/A 79.76 mm3.14 in

G

N/A 47.12 mm1.855 in
H14 N/A 20.9 mm0.823 in

R

N/A 546.1 mm21.5 in

F

N/A 96.80 mm3.813 in
  • 1 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 2 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 3 Tolerance -0 to + 0.4 mm (-0 to +1/64 in)
  • 4 Tolerance ±0.25 mm (±0.010 in)
By clicking Submit, you consent to the personal information you provide being used in the manner as described in our Privacy Notice, including access to that information by Timken personnel who may be located outside your home country. In addition, you agree that the CAD drawings are for your personal, one-time use only, and that you will not modify or create any compilation or derivative work using the CAD drawings or distribute or display the CAD drawings on any website or other media.