Part Number T-3076-C, Inch Sine Bar Gage On The Timken Company

Search Catalog



	All Product Types Inch Sine Bar Gage

		\| Shipping \| Tax \| Terms
Shopping Cart	0 Items

Request for Quote	0 Items

All Product Types > ENGINEERED BEARINGS > Mounted Bearings > Spherical Roller Bearing Metric and Inch Accessories > Inch Sine Bar Gage > Part Number T-3076-C


	Part Number T-3076-C, Inch Sine Bar Gage

larger image

Tapered-bore, antifriction bearings are mounted either on adapter sleeves or on tapered shaft seats.
In cases where tapered bore bearings are mounted directly on the shaft, the shaft must conform to the tapered bore of the bearing to assure proper fit. If a proper fit is not achieved, the results could be:
- Turning of the bearing inner race on the shaft.
- Uneven loading of the bearing.
- Severe inner race hoop stress.
- Insufficient support (back-up) of the inner race on the shaft.
All of these conditions could lead to premature bearing damage. Therefore, the manufacture, maintenance and measurement of accurate shaft tapers is important.
There are two accepted ways of measuring tapered shafts: ring gages and sine bar gages.
Precision measurement of tapered shafts is difficult with ring gages and may be impossible in the case of large shafts where gages are large, cumbersome and heavy.
Sine bar gages provide an accurate and easy method of measurement.
Lightweight and easy to handle and learn, sine bar gages achieve precise gagging of the shaft size and taper.
A complete set for measurement of 1:12 shaft tapers consists of 3 in, 4 in, 5 1/2 in, 7 in, 10 in and 14 in sine bar gages, sine bar saddle no. T-5491-C, web clamp no. T-5489-A and a wooden box no. T-5224-C. A complete set for 1:30 shaft tapers consists of 4 in, 6 in, 8 in and 12 in sine bar gages.
Sine bars can be purchased individually, or in any combination of sizes to meet your individual needs.
All sine bars require a sine bar saddle and web clamp. A wooden box is optional.
For information on the use of sine bars, prices and delivery, consult your Timken representative.

Unit of Measure: Imperial Metric Both

Specifications · Note

Specifications

Size		14

For Bearings		231/750K and up, 232/560K and up, 239/118K and up

Note

All sine bars require a sine bar saddle, T-5491-C and a web clamp T-5489-A.

The table above represents the sine bar sizes developed for a full range of tapered bore bearings with 1:12 and a 1:30 taper. Additional sizes are available to fit a variety of width and taper combinations. Consult your local Timken representative for availability.

NEW PRODUCT OFFERING



	Timken® Wireless Sensor and Monitoring Solution



	Tapered Roller Bearings - 2TS (Matched Bearing Assembly)

Part Number T-3076-C, Inch Sine Bar Gage

Size

For Bearings