3D CAD and 2D Drawings
Find and download 3D CAD and 2D drawings for key Timken products.
Batch CAD Cart (0)
▾
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure
Specifications
Design Unit |
N/A METRIC |
Bore Taper |
N/A 1/30 |
Bearing Weight |
N/A 1513.400 Kg3329.50 lb |
Cage Type |
N/A YMD |
Cage Material |
N/A Brass |
Dimensions
d - Bore |
N/A 670.000 mm26.3780 in |
D - Outer Diameter |
N/A 1090.000 mm42.9130 in |
B' - Inner Ring Width |
N/A 412 mm16.221 in |
B - Outer Ring Width |
N/A 412.000 mm16.2210 in |
Abutment and Fillet Dimensions
R - Inner Ring "To Clear" Radius1 | N/A 6.000 mm0.240 in |
r - Outer Ring "To Clear" Radius2 | N/A 6.000 mm0.240 in |
da - Inner Ring Backing Diameter |
N/A 751.000 mm29.600 in |
Da - Outer Ring Backing Diameter |
N/A 996.000 mm39.200 in |
- 1 Maximum housing fillet radius that bearing corners will clear.
- 2 Maximum shaft fillet radius that bearing corners will clear.
- 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 4 These factors apply for both inch and metric calculations. See engineering
- 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
- 7 See thermal speed ratings in the engineering section.
- 8 Geometry constant for Lubrication Life Adjustment Factor a3l.
By clicking Submit, you consent to the personal information you provide being accessible by Timken personnel, who may be located outside your home country, as described in our Privacy Notice.