Aerospace / Military
Aerospace Series General Aviation Rod Ends Spherical Bearings Mil Spec Series Rod Ends Spherical Bearings Bushings Approved Part Numbers
Commercial / Industrial
Rod End Bearings Inch Rod Ends Metric Rod Ends Spherical Bearings Inch Spherical Bearings Metric Spherical Bearings
Technical Resources
Terms and Definitions Articles Technical Data FAQs Key Term Translation Custom Engineered Products
Online Catalog
Engineers power search our entire catalog of bearing and bushings, with access to every attribute and technical specification possible. View our online catalog...
CAD (0) ▾
  • Cart is empty
  1. Request CAD files
Request Information Add to CAD Cart
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

 N/A Metric

d - Bore

 N/A 110 mm

Lubrication Type

 N/A Industrial Grade Solid Lube

Cage Type

 N/A EJ

Cage Material

 N/A Steel

Factors

Maximum Operating Speed

 N/A 550 rpm
e - ISO Factor1 N/A 0.32
Y0 - ISO Factor2 N/A 2.06
Y1 - ISO Factor3 N/A 2.11
Y2 - ISO Factor4 N/A 3.14
Cg - Geometry Factor5 N/A 0.0743

Dimensions

D - Outer Diameter

 N/A 200 mm7.874 in

B' - Inner Ring Width

 N/A 69.8 mm2.748 in

B - Outer Ring Width

 N/A 69.800 mm2.7480 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius6 N/A 2 mm0.080 in
r - Outer Ring "To Clear" Radius7 N/A 2 mm0.08 in

da - Inner Ring Backing Diameter

 N/A 131 mm5.2000 in

Da - Outer Ring Backing Diameter

 N/A 182 mm7.200 in

Basic Load Ratings

C0 - Static Radial Rating

 N/A 887000 N199000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

 N/A 710000 N160000 lbf
  • 1 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 2 These factors apply for both inch and metric calculations. See engineering
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 5 Geometry constant for Lubrication Life Adjustment Factor a3l.
  • 6 Maximum housing fillet radius that bearing corners will clear.
  • 7 These maximum fillet radii will be cleared by the bearing corners.