Batch CAD Cart (0)
  • Cart is empty
Spherical bearings are designed to manage high radial loads even when misalignment, poor lubrication, contamination, extreme speeds or critical application stresses are present.
Unit of Measure

Specifications

Design Unit

Metric

d - Bore

220 mm

Cage Type

EMB

Cage Material

Brass

Superseded Part

22244YMBW507C08

Dimensions

D - Outer Diameter

400 mm15.748 in

B' - Inner Ring Width

108 mm4.252 in

B - Outer Ring Width

108 mm4.2520 in

Abutment and Fillet Dimensions

R - Inner Ring "To Clear" Radius1 3 mm0.120 in
r - Outer Ring "To Clear" Radius2 3 mm0.12 in

da - Inner Ring Backing Diameter

261 mm10.3000 in

Da - Outer Ring Backing Diameter

359.000 mm14.100 in

Basic Load Ratings

C0 - Static Radial Rating

2310000 N520000 lbf

C1(2) - Dynamic Radial Rating (Two-Rows)

1850000 N415000 lbf

Factors

e - ISO Factor3 0.27
Y0 - ISO Factor4 2.45
Y1 - ISO Factor5 2.51
Y2 - ISO Factor6 3.73

Reference Thermal Speed Rating (Grease)

1300 rpm
Reference Thermal Speed Rating (Oil)7 1500 rpm
Cg - Geometry Factor8 0.1057
  • 1 Maximum housing fillet radius that bearing corners will clear.
  • 2 Maximum shaft fillet radius that bearing corners will clear.
  • 3 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 4 These factors apply for both inch and metric calculations. See engineering
  • 5 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 6 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction on use.
  • 7 See thermal speed ratings in the engineering section.
  • 8 Geometry constant for Lubrication Life Adjustment Factor a3l.